20SIG3157_JULIET3-4-6_Manual7402829-01 R00.indd

MAGNIFIER

JULIET

OWNERS MANUAL

JULIET4™ shown

sigsauer.com

INTRODUCTION

The SIG SAUER

JULIET

Magnifier provides users the ability to engage longer range targets with more

accuracy. When mounted behind a Sig Sauer ROMEO Red Dot sight the quick flip away JULIET Magnifier

allows the user to quickly change from close to long distance targets with a fast single handed operation.

Lens covers protect your JULIET Magnifier from spent casings and other debris. Tested to MIL-SPEC

standards, your JULIET Magnifier is built to never let you down.

FEATURES

(Vary depending upon model)

• Quick Release for easy removal when not in use

• PowerCam 90° Mount

• Rear flip back lens cover for added protection

• 2X lens filters to protect the objective lens of your magnifier

• IPX8 20 Meters for 1 hour

TABLE OF CONTENTS

Please visit sigsauer.com for Owners Manual downloads.

Introduction .................................................3

Features ...................................................3

Contents ...................................................4

Product Identification .........................................4

Installation ..................................................6

Operation ..................................................7

Specifications ...............................................8

Maintenance ...............................................10

SIG SAUER

Electro-Optics Infinite Guarantee™ ................... 11

sigsauer.com

PRODUCT IDENTIFICATION

A Elevation Adjustment

B Windage Adjustment

C Diopter Adjustment Ring

CONTENTS:

• JULIET

Magnifier

• JULIET Flip Away Mount

• 4 Screws (White Nylok patch) 1.41” Setting

• 1.53” Spacer Plate

• 4 Screws (Red Nylok patch) 1.53” Setting

• 1.63” Spacer Plate

• 4 Screws (Blue Nylok patch) 1.63” Setting

• 2.5 mm Hex Tool

• 2 Thread In Lens Covers

• Flip Back Lens Cover

A B

JULIET4™ shown

sigsauer.com

OPERATION

JULIET magnifiers are designed to operate behind red dot sights. When the magnifier is not in use flip it to

the side to return to 1x power.

ADJUSTMENTS

The JULIET should be adjusted to match your red dot sight. To do this, use the windage and elevation

adjustment dials on the top and right side of the magnifier. You will want to adjust the magnifier so that

the red dot is located in the center of the field of view. Adjusting the windage and elevation dials on your

JULIET does not make changes to the POI of your firearm. Those adjustments will need to be made on

your red dot sight.

The JULIET also has an adjustable diopter. To adjust the

diopter rotate the diopter adjustment ring until the aiming

feature is crisp and clear.

Before working on your JULIET

Magnifier always ensure that the firearm is unloaded with the safety on.

INSTALLATION

The JULIET comes with two separate mounting plates that allow the user to mount the magnifier behind

optics ranging from 1.41” to 1.63”. If you need to raise the height of the JULIET you will need to remove

your magnifier from the base and re-attach it with the correct riser plate and its corresponding length

screws.

Once you have selected the correct height, mount the JULIET magnifier behind your red dot sight. Make

sure that there is enough space between the two so that the magnifier can be rotated out of the way

without making contact.

Adjust the torque of the adjustment screw on the opposite of the quick release lever so that the

magnifier can be installed and removed without adjustment. If the adjustment screw is over tightened

you will not be able to operate the quick release lever.

WARNING

Elevation

Diopter

Windage

sigsauer.com

MODEL JULIET3™ JULIET4™ JULIET6™

Magnification

3x 4x 6x

Field of View

8° 6.25° 4°

Objective Lens Clear Aperture

24 mm 24 mm 24 mm

Exit Pupil

8 mm 6 mm 4 mm

Eye Relief

65 mm 65 mm 65 mm

Diopter Range

+/- 2 +/- 2 +/- 2

Adjustment Range

+/- 55 MOA +/- 45 MOA +/- 30 MOA

Waterproofing

20m, 1 hour 20m, 1 hour 20m, 1 hour

Length (A)

4.23 in / 108 mm 4.23 in / 108 mm 5.32 in / 135 mm

Width (B)

1.92 in / 49 mm 1.92 in / 49 mm 1.92 in / 49 mm

Height (C)

2.80 in / 71 mm 2.80 in / 71 mm 2.80 in / 71 mm

JULIET4™ shown

JULIET® SPECIFICATIONS

sigsauer.com

SIG SAUER Electro-Optics Infinite Guarantee™

SIG SAUER has manufactured the most rugged, dependable high-performance firearms

for over two centuries. Our heritage of design, engineering and precision-manufactured

quality predates the existence of any other optics company worldwide. We understand

the importance of quality in the line of fire, at the shooting range or on your next hunt.

SIG SAUER Electro-Optics had to earn the right to wear that badge and the Infinite

Guarantee has your back, forever. Period.

We will repair or replace your SIG SAUER product in the event it becomes damaged or defective, at no

charge to you. If we cannot repair your product, we will replace it with a product in perfect working order

of equal or better physical condition. It doesn’t matter how it happened, whose fault it was, or where you

purchased it.

SIG SAUER Infinite Guarantee™

• Unlimited Lifetime Guarantee

• Fully Transferable

• No Warranty Card Required

• No Receipt Required

• No Time Limit Applies

• No Charge

If you ever have a problem, no matter the cause,

we promise to take care of you when it counts.

Please note that our Infinite Guarantee does

not provide coverage for intentional damage,

misuse, cosmetic damage that does not affect

the performance of the optic, loss, theft or

unauthorized repair or modification. Excludes

electronic components.

MAINTENANCE

Cleaning- keep your lenses clear by using a soft cloth or lens pen. The best way to maintain image

quality is by keeping your lenses clear of dirt and dust that cause scratches.

Always use your lens covers and flip back lens cover to ensure that the sight optics remain scratch free.

REPLACEMENT PARTS

For replacement parts for this model, please call 603-610-3000.

WARNING: CANCER AND REPRODUCTIVE HARM – www.P65Warnings.ca.gov

Description Replacement P/N

THREAD IN LENS COVER 7400640-R

FLIP BACK LENS COVER 7400641-R

RED PATCH SCREW 7401276-R

WHITE PATCH SCREW 7401293-R

BLUE PATCH SCREW 7401294-R

FLIP AWAY MOUNT 7401956-01-R

SPACER PLATE KIT WITH 1.53 PLATE/1.63 PLATE AND MOUNTING SCREWS SOJSPK

P/N 7402829-01 R00

FOR PRODUCT SERVICE ON THIS MODEL, PLEASE CALL 603-610-3000

27100 SW Parkway Avenue, Wilsonville, Oregon 97070 USA

sigsauer.com