MODEL: TA-7830US-A00
USER GUIDE
1 32
SNOOZE button
DC Power jack
DC Power lock screw hole
7
8
64 5
NAP indicator
ALARM ON / OFF indicator
AM / PM / DST time indicator
USB 1A Charger
USB 2.1A “Fast Charge”
LOCATION & DESCRIPTION OF CONTROLS
HOUR SETTING
MINUTE SETTING
ALARM OFF
ALARM SET
ALARM ON
LEFT VIEW
RIGHT VIEW
9
10
14
15
16
11 12 13
NAP ON / OFF
TIME
DIMMER
INSIDE THE BOX
TA-7830US-A00 Clock, Interchangeable AC power adapter (with US), Screws (4X), Plastic
wall plug, Security tether, DC power jack lock and AAA batteries (2X).
TURNING ON THE CLOCK
1. Plug the AC power adapter into the wall socket
2. Plug the DC power jack into the DC socket at the back to turn the unit on.
3. Secure the DC power jack with screw into the DC power lock screw hole.
4. When the clock is powered on, press the TIME button to stop the display from ashing
and to set the time.
* Unscrew the DC jack and unplug it in order to turn the unit o.
* A 1.5m security tether is provided. Screw one side to the clock and the other side to a
securely tether to furniture or wall.
ADJUSTING THE BRIGHTNESS
There are three (3) levels of display brightness. Repeatedly press the Snooze/Dimmer
button to select the desired setting.
SETTING THE TIME
1. Press and hold the TIME button and SNOOZE together for 3 seconds, the display will
ash.
2. Set the year by pressing HOUR / MINUTE buttons, then press TIME button to conrm
3. Set the month by pressing HOUR / MINUTE buttons, then press TIME button to
conrm
4. Set the date by pressing HOUR / MINUTE buttons, then press TIME button to conrm
5. Set Auto-DST feature to on or o by pressing HOUR / MINUTE buttons, then press
TIME button to conrm
2. Press HOUR setting to set hours
3. Press MINUTE setting to set minutes
4. To press TIME button again for conrmation
NOTE: If during the time set no key is pressed for 10 seconds, the previous time will be
automatically stored.
NOTE: When Auto-DST is enabled, the time will automatically be adjusted at 2:00AM
on the designated date (based on US standard) one hour forward in the spring and
one hour back in the fall.
NAP FUNCTION
To set the nap function to wake after a short period of time:
1. Press the NAP button to select the desired nap times between 15-90 minutes or OFF.
The indicator for nap will light up.
2. To stop the alarm, press SNOOZE or NAP button
SETTING THE ALARM AND SNOOZE TIME
1. Slide the switch to alarm SET, the time display will ash.
2. Press HOUR and/or MINUTE button to set the wake up time.
3. Slide the switch to alarm ON to conrm the alarm time. The alarm LED with light up
conrming that alarm is set.
4. Press and hold SNOOZE for 3 sec to set the snooze time (5/10/15 min).
5. Press SNOOZE again to conrm the snooze setting.
TURNING OFF THE ALARM
1. To silence the alarm with snooze, press the SNOOZE button. The alarm will stop, and will
sound again after 5/10/15 minutes (based on the snooze time setting). The alarm
indicator will ash.
2. To turn the alarm o slide the switch to OFF.
NOTE: Sliding the alarm switch to OFF, the alarm will be turned o and will not will not go o
the next day.
BACKUP BATTERY INSTALLATION
Two (2) ‘AAA’ batteries are used to back-up clock and alarm time settings and are
included with the unit.
1. Remove screws to remove the battery door cover.
2. Insert (2) ‘AAA’ batteries.
3. Replace the battery door and screw back in place to secure.
Note: The batteries are used to backup the clock and alarm times when the AC adapter
is disconnected or there is a power failure. When replacing the batteries, do not
disconnect the AC power adapter, otherwise the current time and alarm will be erased.
BACKUP SYSTEM
All settings are memorized, however, the clock time could occasionally need to be
readjusted.
In case of power failure. If backup batteries are not installed, the screen will be ash to
indicate this power failure and the necessity to redo your setting
DUAL USB CHARGING PORTS
This device includes two USB ports. The USB ports support powering and charging
most devices including iPhone, iPad, iPod, Android devices, e-readers, digital cameras
and more (USB cables sold separately).
The USB ports supply 5V/1A and 5V/2.1A respectively.
BATTERY PRECAUTIONS
Follow these precautions when using the batteries in this device:
1. Warning - Danger of explosion if batteries are incorrectly replaced. Replace only with
the same or equivalent type.
2. Use only the size and type of batteries specied.
3. Be sure to follow the correct polarity when installing the batteries as indicated. A
reversed battery may cause damage to the device.
4. Do not mix dierent types of batteries together (e.g Alkaline, Rechargeable, and
Carbon-zinc) or old batteries with fresh ones.
5. If the device is not to be used for a long period of time, remove the batteries to
prevent damage or injury from possible battery leakage.
6. Do not try to recharge a battery not intended to be recharged - it can overheat and
rupture.
ATT
A
FCC WARNING:
is made. The manufacture is not responsible for any radio or TV interference caused by unauthorized
modications to the equipment. Such modications could void the user’s authority to operate the equipment.
ENTION: POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE
NS LA BORNE CORRESPONDANTE DE LA PRISES ET POUSSER JUSQU’AU FOND.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
DANGEROUS VOLTAGE:
is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s
ATTENTION: The exclamation point within an equilateral triangle is intended to alert the user to
the presence of important operating and maintenance (servicing) instructions in the literature
accompanying the appliance.
a. Do not expose this unit or the AC/DC adapter to dripping or splashing water. Keep liquid-lled objects, such
as vases, away from this unit and AC/DC adapter.
b. To ensure that this unit is completely disconnected, unplug it from the wall.
c. Ensure that the AC/DC adapter is easily accessible.
d. Please note the information printed underneath the unit.
e. Batteries should not be exposed to excessive heat such as direct sunshine, re, etc.
f. Do not impede the ventilation of this unit by covering the ventilation openings with items such as newspapers,
table-cloths, curtains, etc.
g. Keep open ames, such as lighted candles, away from this unit.
h. Do not place this unit in closed bookcases, racks, or other spaces without proper ventilation.
i. Use only the same or equivalent type batteries as there is a danger of explosion if the incorrect batteries are
used or they are installed incorrectly.
j. Dispose of batteries properly according to environmental regulations.
SAFETY PRECAUTIONS
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
SURGE PROTECTORS: It is recommended to use a surge protector for AC connection. Lightning and power
surges ARE NOT covered under warranty for this product.
CAN ICES-3 (B) / NMB-3 (B)
Compliance information: This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
IMPORTANT SAFETY PRECAUTIONS
Specication
1. Power Adapter AC input: 100-240V 50-60Hz
2. Power Adapter DC output: 5V, 3.5A
3. Battery Backup: 2 x 1.5V “AAA” size batteries (Battery included)
4. USB Jack DC output: 5V/1A x 5V/2.1A
CONTACT DETAILS
Europe
TeleAdapt Limited
Axis 5
Rhodes Way
Watford
WD24 4YW
United Kingdom
Tel: +44 (0)1923 810200
Americas
TeleAdapt Inc
1315 Greg Street
Suite 110
Sparks
NV 89431
USA
Tel: +1 775 355 8585
Middle East
TeleAdapt Limited
Dubai Media City
Thuraya Tower 1
Office 1008
PO Box 500344
Dubai
UAE
Tel: +971 367 8283
Asia
TeleAdapt HK, Ltd
Unit G, 15/F, Block 2
Leader Industrial Center
No. 188-202 Texaco Road
Tseun Wan
Hong Kong
Tel: +852 2780 9020
Website
For information on other
TeleAdapt products designed
for the hospitality industry,
including specification
and cut sheet downloads,
please visit our website at:
www.teleadapt.com
www.teleadapt.com