August
2022
Adobe FrameMaker INI
Reference
i ADOBE FRAMEMAKER
Contents
ditafm-output.ini . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Create ditamap-to-book output .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Save ditamap as Book <Version Number> with fm components .
. . . . . . . . . . . . . . . 1
Configure the output .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
ditafm-output.ini sections and flags .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
General Options
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
BookWithFM-General .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
BookWithFM-Chapter .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
BookWithFM-Section .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
BookWithFM-Subsection .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
BookWithFM-TOC
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
BookWithFM-Index .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
BookWithFM-ListofFigures .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
BookWithFM-ListofTables
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
BookWithFM-BookTitle .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
BookWithFM-ListOfPara .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
BookWithFM-ListOfParaAlphabetical .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
BookWithFM-ListofMarkers .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
BookWithFM-ListofMarkersAlphabetical .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
BookWithFM-ListOfReferences
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
BookWithFM-IndexOfAuthors .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
BookWithFM-IndexOfSubjects .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
BookWithFM-IndexOfMarkers .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
BookWithFM-IndexOfReferences .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Maker.ini . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
R
eginfo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
P
references .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
ADOBE FRAMEMAKER ii
DropBoxPreferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Fonts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
CMSFavorites .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Directories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
F
iles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
S
pellingProviderPreferences .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
HyphenationProviderPreferences .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
ThesaurusProviderPreferences
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
DialogLayout
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
ViewClients
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
XSLTProcessors .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
APIClients . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Da
shPatterns .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Thermometers .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
DocCompare .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Spelling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
B
annerText .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
FontAngleAliases .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
FontWeightAliases
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
WindowsToFrameFontAliases
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
UnknownToKnownFontMap .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
A
EMRecentFavSettings .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Legal notices .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
1
CREATE DITAMAP-TO-BOOK OUTPUT
CHAPTER 1 DITAFM-OUTPUT.INI
ditafm-output.ini
This topic lists the flags (or parameters) that you can set in the ditafm-output.ini file.
Create ditamap-to-book output
You can configure the generation of the output from a ditamap. Using the ditafm-output.ini file (at
%appdata%\Adobe\FrameMaker\<Version Number>), you can configure the various options for your
output,
such as:
• Type of output to generate (book with FM components or compound FM document)
• Templates to use for chapter, section, subsection ToC, index, and front matter in the generated
book
• Chapter numbers, pagination, para numbers, footnotes, and table footnote numbers
Save ditamap as Book <Version Number> with fm components
You configure the output using the ditafm-output.ini file at %appdata%\Adobe\FrameMaker\<Version
Number>.
Once you have set the configuration in ditafm-output.ini file, with a ditamap in focus, do the following:
• Select File > Save Ditamap As.
• In the Save Document, select Book <Version Number> with fm components.
• Click Save.
FrameMaker generates a book from the ditamap in focus.
Configure the output
The main options in the ditafm-output.ini file are:
Option When set to 0 When set to 1
GenerateFlatBoo
k
Creates a nested book from a ditamap
re
taining its structure, hierarchy, and
levels.
Creates a flat book from a ditamap,
where All topicrefs are flattened at the
chapter level.
SavePDFViaBook
Ro
ute
Generates a compound .fm document
and then a PDF
Generates a book and then PDF. Use
this option if you need book
components, such as index, ToC, and
FrontMatter.
2
DITAFM-OUTPUT.INI SECTIONS AND FLAGS
CHAPTER 1 DITAFM-OUTPUT.INI
The section ditafm-output.ini sections and flags includes details of all the flags in the ditafm-output.ini
file.
ditafm-output.ini sections and flags
General Options
SavePDFViaBookRoute
When set to 0, generates a compound .fm document and then a PDF
When set to 1, generates a book and then a PDF. Use this option when you need book components,
suc
h as index, ToC, and title page, in your output.
TemplateDir
The directory where FrameMaker locates all the template files, such as for Chapter, section, ToC,
Index, for generating the output.
RemovePrologInOutput - DL Element
0 retains the prolog element in the output.
1 removes the prolog element from the output. The prolog element is in the beginning of DITA files
and
includes metadata, such as Author and Copyright.
MapTableTitleToFMTableTitle
0 does not map the Dita <title> element to the FrameMaker table title.
1 maps the Dita table title to FrameMaker table title in the output. If the table spans multiple pages,
the
table title repeats for each page. The format of the table title for continued pages is Table <table
nu
mber>: <table title> (Continued) (Sheet x of y). Further, the table title can be controlled with the
fol
lowing flags: AddVariablesToTableTitle and TableTitleFormatting.
AddVariablesToTableTitle
Add the value Continuation or Sheet. Or add both delimited by pipeline (Continuation|Sheet).
Continuation adds (Continued) in the table title when table spans multiple pages.
MapTableTitleto
FM
TableTitle
Does not repeat title of table when a
table continues across multiple pages
Repeats title of table for multiple
pages when the table breaks across
multiple pages
MoveFigureTitle
To
FollowImage
The figure titles appear in the output
book as they are in the ditamap.
Moves the figure title to below the
image in the generated file. (In DITA,
by default the figure titles are placed
above the images).
Option When set to 0 When set to 1
3
DITAFM-OUTPUT.INI SECTIONS AND FLAGS
CHAPTER 1 DITAFM-OUTPUT.INI
Sheet displays (Sheet x of y) if the table spans multiple pages.
TableTitleFormatting
When set to FromTableFormat, the table title takes it formatting from the relevant table format.
When set to FromTitleElementFormat, the table title takes it formatting from the title element
fo
r
mat in the EDD.
MoveFigureTitleToFollowImage
0 keeps the image title above the image.
1 keeps the image title below the image.
CompositeDocTemplate_1.1
The name of the composite document template for DITA 1.1. The directory is set in the TemplateDir
flag.
The composite document template is used when creating a composite doc from ditamap or a flat
bo
o
k from ditamap.
CompositeDocTemplate_1.2
The name of the composite document template for DITA 1.2. The directory is set in the TemplateDir
flag.
The composite document template is used when creating a composite doc from ditamap or a flat
book from ditamap.
DropBannerText
0 retains banner text in the output.
1 drops the banner text in the output.
For more information on banner text, see FrameMaker Help.
BookWithFM-General
PerformPostProcessing
Post processing includes all the processing of the book file output according to the
ditafm-output.ini, such as:
• Applying templates for title and chapter pages
• Adding indexes, tables, and lists
• Applying page numbers across the book
• Managing pagination
• Creating title pages for folder/main book/child book.
When set to 0, FrameMaker does not perform post processing.
When set to 1, FrameMaker performs post processing.
4
DITAFM-OUTPUT.INI SECTIONS AND FLAGS
CHAPTER 1 DITAFM-OUTPUT.INI
GenerateFMComponentsAtOneLoc
0 generates the book components at the location of the relevant input DITA files.
1 generates the book components at a single location where the book is saved.
GenerateFlatBook
0 generates a nested book from a ditamap retaining its structure, hierarchy, and levels.
1 generates a flatbook from a ditamap, where all topicrefs are flattened at the chapter level.
GenerateTOC
0 does not generate a ToC in the output.
1 generates a ToC in the output.
GenerateIndex
0 does not generate an index in the output.
1 generates an index in the output.
GenerateIndexOfAuthors
0 does not generate an index of authors in the output.
1 generates an index of authors in the output. The author names are picked up according to the
A
u
thor marker type.
To generate an index of authors specify the following also:
GenerateIndexOfSubjects
0 does not generate an index of subjects in the output.
1 generates an index of subjects in the output. The index is created with the marker entries of type
Sub
ject.
To generate an index of subjects, specify the following also:
Section Flag
[BookWithFM-IndexOfAuthors
]
Template
MarkerTags
Section Flag
[BookWithFM-IndexOfSubjects] Template
MarkerTags
5
DITAFM-OUTPUT.INI SECTIONS AND FLAGS
CHAPTER 1 DITAFM-OUTPUT.INI
GenerateIndexOfMarkers
0 does not generate an index of markers in the output.
1 generates an index of markers of type Index.
To generate an index of subjects, specify the following also:
GenerateIndexOfReferences
0 does not generate an index of references in the output.
1 generates an index of references, such as an index of fonts, in the output. The references can be
o
f
different types, such as imported graphics, fonts, text insets, unresolved cross references.
To generate an index of subjects, specify the following also:
GenerateListofFigures
0 does not generate a list of figures in the output.
1 generates a list of figures in the output.
To generate a list of figures, specify the following also:
GenerateListofTables
0 does not generate a list of tables in the output.
1 generates a list of tables in the output.
To generate a list of tables, specify the following also:
Section Flag
[BookWithFM-IndexOfMarkers] Template
MarkerTags
Section Flag
[BookWithFM-IndexOfReferences] Template
References
Section Flag
[BookWithFM-ListofFigures] Template
ElementTags
ParaTags
6
DITAFM-OUTPUT.INI SECTIONS AND FLAGS
CHAPTER 1 DITAFM-OUTPUT.INI
GenerateListOfPara
0 does not generate a list of para in the output.
1 generates a list of paras used in the output.
To generate a list of para, also specify the template in the Template flag in the [BookWithFM-ListOf-
Para] section.
GenerateListOfParaAlphabetical
0 does not generate an alphabetical list of paras.
1 generates an alphabetical list of paras in the output.
Also, specify a template in the Template flag in the [BookWithFM-ListOfParaAlphabetical] section.
GenerateListOfMarkers
0 does not generate a list of markers in the output.
1 generates a list of markers in the output.
The marker types to include in the list are specified in the Template flag in the [Book-
WithFM-ListOfMarkers] section.
GenerateListOfMarkersAlphabetical
0 does not generate an alphabetical list of markers in the output.
1 generates an alphabetical list of markers in the output. Also, specify a template in the Template
flag in the [BookWithFM-ListOfMarkersAlphabetical] section.
The marker types to include in the list are specified in the MarkerTags flag in the [Book-
WithFM-ListOfMarkersAlphabetical] section.
GenerateListOfReferences
0 does not generate a list of references in the output.
1 generates a list of references, such as list of fonts or unresolved cross references, in the output.
A
lso, specify a template in the Template flag in the [BookWithFM-ListOfReferences] section.
The references to include are specified using the References flag under the [BookWithFM-ListOf-
References] section.
Section Flag
[BookWithFM-ListofTables] Template
ElementTags
ParaTags
7
DITAFM-OUTPUT.INI SECTIONS AND FLAGS
CHAPTER 1 DITAFM-OUTPUT.INI
GenerateBookTitlePage
0 does not generate a book title page in the output.
1 generates a book title page in the output.
GenerateChildBookTitlePage
0 does not generate title pages for child books in the output.
1 generates title pages for child books in the output.
GenerateFolderTitlePage
In case topichead element is used to create hierarchy in your ditamap, set this flag as 1 to create
ti
tl
e pages as templates for folders.
ApplyOutputTemplate
1 applies the following output templates in the folder specified as TemplateDir to the output:
• Chapter
• Section
• subsection
This flag does not affect the generated book components such as ToC, Index, and title pages.
OutputFilesOrder
Specify the order of the files in the output. Use the following values delimited with pipelines to
spe
cify the order: BookTitle|TOC|Files|ListofFigures|ListofTables|Index.
TemplateImportFlags
Specify which all formats you want to import from the publishing template. Use one or more of the
following values delimited by pipelines (the order is irrelevant):
PGF|FONT|PAGE|TABLE|COND|REFPAGE|VAR|XREF|COLOR|MATH|DOCUMENT_PROPS|COMBI
NED_
FONTS|FBA|STYLE|REMOVE_PAGE_BREAKS|REMOVE_EXCEPTIONS. To import everything in
the
template, set the flag to ALL.
BookWithFM-Chapter
Template
Name of the chapter template FrameMaker uses for generating the output.
TitleTemplate
Name of the template used as title page for child book\folder title at chapter level.
ChapterNumberingFirst
Set the chapter numbering flag using one of the following values:
• Restart: Restart chapter numbering from 1.
• Continue: Continue from previous chapter file.
8
DITAFM-OUTPUT.INI SECTIONS AND FLAGS
CHAPTER 1 DITAFM-OUTPUT.INI
• ReadFromFile: Use the numbering value specified in the associated document.
• UseSame: Use same as the previous chapter.
ChapterNumberingFirstValue
Specify a number to hardcode the first chapter’s number. Default value is 1.
ChapterNumberingFirstText
Specify the text to apply to the first chapter if not a number.
ChapterNumberingDefault
Set the default chapter (apart from first chapter) numbering flag using one of the following values:
• Restart: Restart chapter numbering from 1.
• Continue: Continue from previous chapter file.
• ReadFromFile: Use the numbering value specified in the associated document.
• UseSame: Use same as the previous chapter.
ChapterNumberingDefaultValue
If you have specified ChapterNumberingFirst as Restart, specify a value for the default chapter
numbering.
ChapterNumberingDefaultText
If you have specified ChapterNumberingFirst as Restart, specify a text value for the default chapter
numbering.
ChapterNumberingFormat
Choose one of the following as the chapter numbering format:
• Numeric
• Roman_UC
• Roman_LC
• Alpha_UC
• Alpha_LC
• Kanji
• Zenkaku
• Zenkaku_UC
• Zenkaku_LC
• Kanji_Kazu
• Daiji
• Text
• FullWidth
• FullWidth_UC
• FullWidth_LC
• Chinese_Numeric
9
DITAFM-OUTPUT.INI SECTIONS AND FLAGS
CHAPTER 1 DITAFM-OUTPUT.INI
PageNumberingFirst
For the first chapter, set the page numbering flag using one of the following values:
• Restart: Restart page numbering from 1.
• Continue: Continue from previous page.
• ReadFromFile: Use the numbering value specified in the associated document.
• UseSame: Use same as the previous page.
PageNumberingFirstValue
Specify a number to hardcode the first page number for the first chapter in the book output.
PageNumberingDefault
For page numbers apart from the first chapter, set the default page numbering flag using one of the
fol
lowing values:
• Restart: Restart page numbering from 1.
• Continue: Continue from previous page file.
• ReadFromFile: Use the numbering value specified in the associated document.
PageNumberingDefaultValue
Enter a default value in this field.
PageNumberingFormat
Choose one of the following as the page numbering format:
• Numeric
• Roman_UC
• Roman_LC
• Alpha_UC
• Alpha_LC
• Kanji
• Zenkaku
• Zenkaku_UC
• Zenkaku_LC
• Kanji_Kazu
• Daiji
• FullWidth
• FullWidth_UC
• FullWidth_LC
• Chinese_Numeric
Pagination
Specify the pagination of the chapter as one of the following:
10
DITAFM-OUTPUT.INI SECTIONS AND FLAGS
CHAPTER 1 DITAFM-OUTPUT.INI
• DoubleSided
• SingleSided
If you have selected the pagination as double sided, also set the FirstPageSide flag.
PageRounding
Set the page rounding flag as one of the following:
• MakeEven: FrameMaker makes the number of pages in a chapter even, if not already even, by
inserting a blank page in the end.
• MakeOdd: FrameMaker makes the number of pages in a chapter odd, if not already odd, by
inserting a blank page in the end.
• DontChange: FrameMaker does not change the number of pages in a chapter.
• DeleteEmpty: FrameMaker deletes the empty pages in the end of the chapter files.
FirstPageSide
Use one of the following options to set the first page of the chapter file:
• Restart: Restart page numbering from 1.
• Continue: Continue from previous page.
• ReadFromFile: Use the numbering value specified in the associated document.
• UseSame: Use same as the previous page.
ParaNumberingFirst
Specify the paragraph numbering for the first paras in the list in the template as one of the
fo
llowing:
• Restart: Restart paragraph numbering from 1.
• Continue: Continue from previous paragraph.
• ReadFromFile: Use the numbering value specified in the associated template.
ParaNumberingDefault
Specify the paragraph numbering for the paras, apart from the first ones, in the list in the template
as
one of the following:
• Restart: Restart paragraph numbering from 1.
• Continue: Continue from previous paragraph.
• ReadFromFile: Use the numbering value specified in the associated template.
FootnoteNumberingFirst
Set the footnote numbering flag for the first chapter using one of the following values:
• Restart: Restart footnote numbering from 1 for each page. When you have set this value, specify
FootnoteNumberingFirstValue also.
• PerPage: For each page in the book, FrameMaker restarts the footnote numbering from 1.
• Continue: Continue from previous page within a chapter file.
11
DITAFM-OUTPUT.INI SECTIONS AND FLAGS
CHAPTER 1 DITAFM-OUTPUT.INI
• ReadFromFile: Use the numbering properties specified in the associated chapter document.
FootnoteNumberingFirstValue
If you have specified FootnoteNumberingFirst as Restart, specify a number for the first footnote in
the first chapter. Default value is 1.
FootNoteNumberingFirstCustom
Specify a custom value for the footnote numbering for the first chapter.
FootnoteNumberingDefault
Set the footnote numbering flag for the second and subsequent chapters using one of the following
v
a
lues:
• Restart: Restart footnote numbering from 1 for each page. When you have set this value, specify
FootnoteNumberingFirstValue also.
• PerPage: For each page in the book, FrameMaker restarts the footnote numbering from 1.
• Continue: Continue from previous page within a chapter file.
• ReadFromFile: Use the numbering properties specified in the associated chapter document.
FootnoteNumberingDefaultValue
If you have specified FootnoteNumberingDefault as Restart, specify a number for the first footnote
in the second and subsequent chapters. Default value is 1.
FootNoteNumberingDefaultCustom
Specify a custom value for the footnote numbering for the second and subsequent chapters in the
bo
ok.
FootnoteNumberingFormat
Choose one of the following as the footnote numbering format for all the chapters in the book:
• Numeric
• Roman_UC
• Roman_LC
• Alpha_UC
• Alpha_LC
• Kanji
• Zenkaku
• Zenkaku_UC
• Zenkaku_LC
• Kanji_Kazu
• Daiji
• FullWidth
• FullWidth_UC
• FullWidth_LC
12
DITAFM-OUTPUT.INI SECTIONS AND FLAGS
CHAPTER 1 DITAFM-OUTPUT.INI
• Chinese_Numeric
• Custom (When you use this value, also set the FootNoteNumberingFirstCustom and FootNoteNum-
beringDefaultCustom flags.
TableFootnoteNumberingFirst
Set the table footnote numbering flag for the first chapter using one of the following values:
• Restart: Restart table footnote numbering for the first chapter.
• ReadFromFile: Use the table footnote numbering properties specified in the associated chapter
document.
TableFootnoteNumberFirstCustom
Specify a custom value for the table footnote numbering for the first chapter.
TableFootnoteNumberDefault
Set the table footnote numbering flag for the second and subsequent chapters using one of the
following values:
• Restart: Restart table footnote numbering for the chapter.
• ReadFromFile: Use the table footnote numbering properties specified in the associated chapter
document.
TableFootnoteNumberDefaultCustom
Specify a custom value for the footnote numbering for the second and subsequent chapters in the
boo
k.
TableFootnoteNumberingFormat
Choose one of the following as the table footnote numbering format for all the chapters in the
book:
• Numeric
• Roman_UC
• Roman_LC
• Alpha_UC
• Alpha_LC
• Kanji
• Zenkaku
• Zenkaku_UC
• Zenkaku_LC
• Kanji_Kazu
• Daiji
• FullWidth
• FullWidth_UC
• FullWidth_LC
13
DITAFM-OUTPUT.INI SECTIONS AND FLAGS
CHAPTER 1 DITAFM-OUTPUT.INI
• Chinese_Numeric
• Custom (When you use this value, also set the TableFootnoteNumberFirstCustom and TableFoot-
noteNumberDefaultCustom flags.
BookWithFM-Section
Template
Name of the template FrameMaker uses for generating the section.
TitleTemplate
Name of the template used as title page for child book\folder title at section level.
SectionNumberingFirst
Set the section numbering flag using one of the following values:
• Restart: Restart section numbering from 1.
• Continue: Continue from previous section.
• ReadFromFile: Use the numbering value specified in the associated document.
• UseSame: Use same as the previous section.
SectionNumberingFirstValue
Specify a number to hardcode the first section’s number. Default value is 1.
SectionNumberingFirstText
Specify the text to apply to the first section if not a number.
SectionNumberingDefault
Set the default section (apart from first section) numbering flag using one of the following values:
• Restart: Restart section numbering from 1.
• Continue: Continue from previous section file.
• ReadFromFile: Use the numbering value specified in the associated document.
• UseSame: Use same as the previous section.
SectionNumberingDefaultValue
If you have specified SectionNumberingFirst as Restart, specify a value for the default section
numbering.
SectionNumberingDefaultText
If you have specified SectionNumberingFirst as Restart, specify a text value for the default section
numbering.
SectionNumberingFormat
Choose one of the following as the section numbering format:
• Numeric
14
DITAFM-OUTPUT.INI SECTIONS AND FLAGS
CHAPTER 1 DITAFM-OUTPUT.INI
• Roman_UC
• Roman_LC
• Alpha_UC
• Alpha_LC
• Kanji
• Zenkaku
• Zenkaku_UC
• Zenkaku_LC
• Kanji_Kazu
• Daiji
• Text
• FullWidth
• FullWidth_UC
• FullWidth_LC
• Chinese_Numeric
PageNumberingFirst
For the first section, set the page numbering flag using one of the following values:
• Restart: Restart page numbering from 1.
• Continue: Continue from previous page.
• ReadFromFile: Use the numbering value specified in the associated document.
• UseSame: Use same as the previous page.
PageNumberingFirstValue
Specify a number to hardcode the first page number for the first section in the book output.
PageNumberingDefault
For page numbers apart from the first section, set the default page numbering flag using one of the
fo
l
lowing values:
• Restart: Restart page numbering from 1.
• Continue: Continue from previous page file.
• ReadFromFile: Use the numbering value specified in the associated document.
PageNumberingDefaultValue
Enter a default value in this field.
PageNumberingFormat
Choose one of the following as the page numbering format:
• Numeric
• Roman_UC
15
DITAFM-OUTPUT.INI SECTIONS AND FLAGS
CHAPTER 1 DITAFM-OUTPUT.INI
• Roman_LC
• Alpha_UC
• Alpha_LC
• Kanji
• Zenkaku
• Zenkaku_UC
• Zenkaku_LC
• Kanji_Kazu
• Daiji
• FullWidth
• FullWidth_UC
• FullWidth_LC
• Chinese_Numeric
Pagination
Specify the pagination of the section as one of the following:
• DoubleSided
• SingleSided
If you have selected the pagination as double sided, also set the FirstPageSide flag.
PageRounding
Set the page rounding flag as one of the following:
• MakeEven: FrameMaker makes the number of pages in a section even, if not already even, by
inserting a blank page in the end.
• MakeOdd: FrameMaker makes the number of pages in a section odd, if not already odd, by
inserting a blank page in the end.
• DontChange: FrameMaker does not change the number of pages in a section.
• DeleteEmpty: FrameMaker deletes the empty pages in the end of the section files.
FirstPageSide
Use one of the following options to set the first page of the section file:
• Restart: Restart page numbering from 1.
• Continue: Continue from previous page.
• ReadFromFile: Use the numbering value specified in the associated document.
• UseSame: Use same as the previous page.
ParaNumberingFirst
Specify the paragraph numbering for the first paras in the list in the template as one of the
fo
l
lowing:
• Restart: Restart paragraph numbering from 1.
16
DITAFM-OUTPUT.INI SECTIONS AND FLAGS
CHAPTER 1 DITAFM-OUTPUT.INI
• Continue: Continue from previous paragraph.
• ReadFromFile: Use the numbering value specified in the associated template.
ParaNumberingDefault
Specify the paragraph numbering for the paras, apart from the first ones, in the list in the template
as one of the following:
• Restart: Restart paragraph numbering from 1.
• Continue: Continue from previous paragraph.
• ReadFromFile: Use the numbering value specified in the associated template.
FootnoteNumberingFirst
Set the footnote numbering flag for the first section using one of the following values:
• Restart: Restart footnote numbering from 1 for each page. When you have set this value, specify
FootnoteNumberingFirstValue also.
• PerPage: For each page in the book, FrameMaker restarts the footnote numbering from 1.
• Continue: Continue from previous page within a section file.
• ReadFromFile: Use the numbering properties specified in the associated section document.
FootnoteNumberingFirstValue
If you have specified FootnoteNumberingFirst as Restart, specify a number for the first footnote in
the first section. Default value is 1.
FootNoteNumberingFirstCustom
Specify a custom value for the footnote numbering for the first section.
FootnoteNumberingDefault
Set the footnote numbering flag for the second and subsequent sections using one of the following
v
a
lues:
• Restart: Restart footnote numbering from 1 for each page. When you have set this value, specify
FootnoteNumberingFirstValue also.
• PerPage: For each page in the book, FrameMaker restarts the footnote numbering from 1.
• Continue: Continue from previous page within a section file.
• ReadFromFile: Use the numbering properties specified in the associated section document.
FootnoteNumberingDefaultValue
If you have specified FootnoteNumberingDefault as Restart, specify a number for the first footnote
in the second and subsequent sections. Default value is 1.
FootNoteNumberingDefaultCustom
Specify a custom value for the footnote numbering for the second and subsequent sections in the
bo
ok.
17
DITAFM-OUTPUT.INI SECTIONS AND FLAGS
CHAPTER 1 DITAFM-OUTPUT.INI
FootnoteNumberingFormat
Choose one of the following as the footnote numbering format for all the sections in the book:
• Numeric
• Roman_UC
• Roman_LC
• Alpha_UC
• Alpha_LC
• Kanji
• Zenkaku
• Zenkaku_UC
• Zenkaku_LC
• Kanji_Kazu
• Daiji
• FullWidth
• FullWidth_UC
• FullWidth_LC
• Chinese_Numeric
• Custom (When you use this value, also set the FootNoteNumberingFirstCustom and FootNoteNum-
beringDefaultCustom flags.
TableFootnoteNumberingFirst
Set the table footnote numbering flag for the first section using one of the following values:
• Restart: Restart table footnote numbering for the first section.
• ReadFromFile: Use the table footnote numbering properties specified in the associated section
document.
TableFootnoteNumberFirstCustom
Specify a custom value for the table footnote numbering for the first section.
TableFootnoteNumberDefault
Set the table footnote numbering flag for the second and subsequent sections using one of the
fo
l
lowing values:
• Restart: Restart table footnote numbering for the section.
• ReadFromFile: Use the table footnote numbering properties specified in the associated section
document.
TableFootnoteNumberDefaultCustom
Specify a custom value for the footnote numbering for the second and subsequent sections in the
boo
k.
18
DITAFM-OUTPUT.INI SECTIONS AND FLAGS
CHAPTER 1 DITAFM-OUTPUT.INI
TableFootnoteNumberingFormat
Choose one of the following as the table footnote numbering format for all the sections in the book:
• Numeric
• Roman_UC
• Roman_LC
• Alpha_UC
• Alpha_LC
• Kanji
• Zenkaku
• Zenkaku_UC
• Zenkaku_LC
• Kanji_Kazu
• Daiji
• FullWidth
• FullWidth_UC
• FullWidth_LC
• Chinese_Numeric
• Custom (When you use this value, also set the TableFootnoteNumberFirstCustom and TableFoot-
noteNumberDefaultCustom flags.
BookWithFM-Subsection
Template
Name of the template FrameMaker uses for generating the subsection.
TitleTemplate
Name of the template used as title page for child book\folder title at subsection level.
SubsectionNumberingFirst
Set the subsection numbering flag using one of the following values:
• Restart: Restart subsection numbering from 1.
• Continue: Continue from previous subsection.
• ReadFromFile: Use the numbering value specified in the associated document.
• UseSame: Use same as the previous subsection.
SubsectionNumberingFirstValue
Specify a number to hardcode the first subsection’s number. Default value is 1.
SubsectionNumberingFirstText
Specify the text to apply to the first subsection if not a number.
19
DITAFM-OUTPUT.INI SECTIONS AND FLAGS
CHAPTER 1 DITAFM-OUTPUT.INI
SubsectionNumberingDefault
Set the default subsection (apart from first subsection) numbering flag using one of the following
values:
• Restart: Restart subsection numbering from 1.
• Continue: Continue from previous subsection file.
• ReadFromFile: Use the numbering value specified in the associated document.
• UseSame: Use same as the previous subsection.
SubsectionNumberingDefaultValue
If you have specified SubsectionNumberingFirst as Restart, specify a value for the default subsec-
tion numbering.
SubsectionNumberingDefaultText
If you have specified SubsectionNumberingFirst as Restart, specify a text value for the default
subsection numbering.
SubsectionNumberingFormat
Choose one of the following as the subsection numbering format:
• Numeric
• Roman_UC
• Roman_LC
• Alpha_UC
• Alpha_LC
• Kanji
• Zenkaku
• Zenkaku_UC
• Zenkaku_LC
• Kanji_Kazu
• Daiji
• Text
• FullWidth
• FullWidth_UC
• FullWidth_LC
• Chinese_Numeric
PageNumberingFirst
For the first subsection, set the page numbering flag using one of the following values:
• Restart: Restart page numbering from 1.
• Continue: Continue from previous page.
• ReadFromFile: Use the numbering value specified in the associated document.
20
DITAFM-OUTPUT.INI SECTIONS AND FLAGS
CHAPTER 1 DITAFM-OUTPUT.INI
• UseSame: Use same as the previous page.
PageNumberingFirstValue
Specify a number to hardcode the first page number for the first subsection in the book output.
PageNumberingDefault
For page numbers apart from the first subsection, set the default page numbering flag using one of
the
following values:
• Restart: Restart page numbering from 1.
• Continue: Continue from previous page file.
• ReadFromFile: Use the numbering value specified in the associated document.
PageNumberingDefaultValue
Enter a default value in this field.
PageNumberingFormat
Choose one of the following as the page numbering format:
• Numeric
• Roman_UC
• Roman_LC
• Alpha_UC
• Alpha_LC
• Kanji
• Zenkaku
• Zenkaku_UC
• Zenkaku_LC
• Kanji_Kazu
• Daiji
• FullWidth
• FullWidth_UC
• FullWidth_LC
• Chinese_Numeric
Pagination
Specify the pagination of the subsection as one of the following:
• DoubleSided
• SingleSided
If you have selected the pagination as double sided, also set the FirstPageSide flag.
PageRounding
Set the page rounding flag as one of the following:
21
DITAFM-OUTPUT.INI SECTIONS AND FLAGS
CHAPTER 1 DITAFM-OUTPUT.INI
• MakeEven: FrameMaker makes the number of pages in a subsection even, if not already even, by
inserting a blank page in the end.
• MakeOdd: FrameMaker makes the number of pages in a subsection odd, if not already odd, by
inserting a blank page in the end.
• DontChange: FrameMaker does not change the number of pages in a subsection.
• DeleteEmpty: FrameMaker deletes the empty pages in the end of the subsection files.
FirstPageSide
Use one of the following options to set the first page of the subsection file:
• Restart: Restart page numbering from 1.
• Continue: Continue from previous page.
• ReadFromFile: Use the numbering value specified in the associated document.
• UseSame: Use same as the previous page.
ParaNumberingFirst
Specify the paragraph numbering for the first paras in the list in the template as one of the
fo
l
lowing:
• Restart: Restart paragraph numbering from 1.
• Continue: Continue from previous paragraph.
• ReadFromFile: Use the numbering value specified in the associated template.
ParaNumberingDefault
Specify the paragraph numbering for the paras, apart from the first ones, in the list in the template
as
one of the following:
• Restart: Restart paragraph numbering from 1.
• Continue: Continue from previous paragraph.
• ReadFromFile: Use the numbering value specified in the associated template.
FootnoteNumberingFirst
Set the footnote numbering flag for the first subsection using one of the following values:
• Restart: Restart footnote numbering from 1 for each page. When you have set this value, specify
FootnoteNumberingFirstValue also.
• PerPage: For each page in the book, FrameMaker restarts the footnote numbering from 1.
• Continue: Continue from previous page within a subsection file.
• ReadFromFile: Use the numbering properties specified in the associated subsection document.
FootnoteNumberingFirstValue
If you have specified FootnoteNumberingFirst as Restart, specify a number for the first footnote in
the first subsection. Default value is 1.
FootNoteNumberingFirstCustom
Specify a custom value for the footnote numbering for the first subsection.
22
DITAFM-OUTPUT.INI SECTIONS AND FLAGS
CHAPTER 1 DITAFM-OUTPUT.INI
FootnoteNumberingDefault
Set the footnote numbering flag for the second and subsequent subsections using one of the
following values:
• Restart: Restart footnote numbering from 1 for each page. When you have set this value, specify
FootnoteNumberingFirstValue also.
• PerPage: For each page in the book, FrameMaker restarts the footnote numbering from 1.
• Continue: Continue from previous page within a subsection file.
• ReadFromFile: Use the numbering properties specified in the associated subsection document.
FootnoteNumberingDefaultValue
If you have specified FootnoteNumberingDefault as Restart, specify a number for the first footnote
in the second and subsequent subsections. Default value is 1.
FootNoteNumberingDefaultCustom
Specify a custom value for the footnote numbering for the second and subsequent subsections in
the
book.
FootnoteNumberingFormat
Choose one of the following as the footnote numbering format for all the subsections in the book:
• Numeric
• Roman_UC
• Roman_LC
• Alpha_UC
• Alpha_LC
• Kanji
• Zenkaku
• Zenkaku_UC
• Zenkaku_LC
• Kanji_Kazu
• Daiji
• FullWidth
• FullWidth_UC
• FullWidth_LC
• Chinese_Numeric
• Custom (When you use this value, also set the TableFootnoteNumberFirstCustom and TableFoot-
noteNumberDefaultCustom flags.
TableFootnoteNumberingFirst
Set the table footnote numbering flag for the first subsection using one of the following values:
• Restart: Restart table footnote numbering for the first subsection.
23
DITAFM-OUTPUT.INI SECTIONS AND FLAGS
CHAPTER 1 DITAFM-OUTPUT.INI
• ReadFromFile: Use the table footnote numbering properties specified in the associated subsection
document.
TableFootnoteNumberFirstCustom
Specify a custom value for the table footnote numbering for the first subsection.
TableFootnoteNumberDefault
Set the table footnote numbering flag for the second and subsequent subsections using one of the
fol
lowing values:
• Restart: Restart table footnote numbering for the subsection.
• ReadFromFile: Use the table footnote numbering properties specified in the associated subsection
document.
TableFootnoteNumberDefaultCustom
Specify a custom value for the footnote numbering for the second and subsequent subsections in
the
book.
TableFootnoteNumberingFormat
Choose one of the following as the table footnote numbering format for all the subsections in the
book:
• Numeric
• Roman_UC
• Roman_LC
• Alpha_UC
• Alpha_LC
• Kanji
• Zenkaku
• Zenkaku_UC
• Zenkaku_LC
• Kanji_Kazu
• Daiji
• FullWidth
• FullWidth_UC
• FullWidth_LC
• Chinese_Numeric
• Custom (When you use this value, also set the TableFootnoteNumberFirstCustom and TableFoot-
noteNumberDefaultCustom flags.
24
DITAFM-OUTPUT.INI SECTIONS AND FLAGS
CHAPTER 1 DITAFM-OUTPUT.INI
BookWithFM-TOC
Template
Name of the template FrameMaker uses for generating the ToC in the output.
ElementTags
Specify the element tags to include in the ToC. Delimit multiple elements tags with pipelines.
ParaTags
Specify the paragraph tags to include in the ToC. Delimit multiple paragraph tags with pipelines.
PageNumbering
Set the page numbering flag for the ToC file using one of the following values:
• Restart: Restart page numbering from 1.
• Continue: Continue from previous file.
• ReadFromFile: Use the numbering value specified in the associated document.
PageNumberingValue
If you have specified PageNumbering as Restart, specify a number to hardcode the first page’s
number. Default value is 1.
PageNumberingFormat
Choose one of the following as the ToC page numbering format:
• Numeric
• Roman_UC
• Roman_LC
• Alpha_UC
• Alpha_LC
• Kanji
• Zenkaku
• Zenkaku_UC
• Zenkaku_LC
• Kanji_Kazu
• Daiji
• FullWidth
• FullWidth_UC
• FullWidth_LC
• Chinese_Numeric
Pagination
Specify the pagination of the ToC as:
25
DITAFM-OUTPUT.INI SECTIONS AND FLAGS
CHAPTER 1 DITAFM-OUTPUT.INI
• DoubleSided
• SingleSided
If you have selected the pagination as double sided, also set the FirstPageSide flag.
PageRounding
Set the page rounding flag as one of the following:
• MakeEven: FrameMaker makes the number of pages in the ToC even, if not already even, by
inserting a blank page in the end.
• MakeOdd: FrameMaker makes the number of pages in the ToC odd, if not already odd, by inserting
a blank page in the end.
• DontChange: FrameMaker does not change the number of pages in the ToC.
• DeleteEmpty: FrameMaker deletes the empty pages in the end of the ToC.
FirstPageSide
Use one of the following options to set the first page of the ToC file:
• ReadFromFile: Use the page side in the associated document.
• NextAvailable: Starts the ToC with a left page if the previous page in the book was a right one. Or
starts the ToC with a right page if the previous page in the book was a left one.
• Left: Use this value to start ToC with a left page.
• Right: Use this value to start ToC with a right page.
ParaNumbering
Specify the paragraph numbering for the headings in the ToC:
• Restart: Restart paragraph numbering from 1.
• Continue: Continue from previous paragraph.
• ReadFromFile: Use the numbering value specified in the associated template.
FootnoteNumbering
Set the footnote numbering flag using one of the following values:
• Restart: Restart footnote numbering from 1.
• PerPage: For each page in the ToC, FrameMaker restarts the footnote numbering from 1.
• Continue: Continue from previous page within the file.
• ReadFromFile: Use the numbering properties specified in the associated document.
FootnoteNumberingValue
If you have specified FootnoteNumbering as Restart, specify a number for the first footnote in the
first chapter. Default value is 1.
FootNoteNumberingCustom
Specify a custom value for the footnote numbering for the ToC.
26
DITAFM-OUTPUT.INI SECTIONS AND FLAGS
CHAPTER 1 DITAFM-OUTPUT.INI
FootnoteNumberingFormat
Choose one of the following as the footnote numbering format for all the file:
• Numeric
• Roman_UC
• Roman_LC
• Alpha_UC
• Alpha_LC
• Kanji
• Zenkaku
• Zenkaku_UC
• Zenkaku_LC
• Kanji_Kazu
• Daiji
• FullWidth
• FullWidth_UC
• FullWidth_LC
• Chinese_Numeric
• Custom
TableFootnoteNumbering
Set the table footnote numbering flag for the file:
• Restart: Restart table footnote numbering for the ToC.
• ReadFromFile: Use the table footnote numbering properties specified in the associated file.
TableFootNoteNumberingCustom
Specify a custom value for the table footnote numbering for the ToC.
TableFootnoteNumberingFormat
Choose one of the following as the table footnote numbering format for all the file:
• Numeric
• Roman_UC
• Roman_LC
• Alpha_UC
• Alpha_LC
• Kanji
• Zenkaku
• Zenkaku_UC
• Zenkaku_LC
• Kanji_Kazu
27
DITAFM-OUTPUT.INI SECTIONS AND FLAGS
CHAPTER 1 DITAFM-OUTPUT.INI
• Daiji
• FullWidth
• FullWidth_UC
• FullWidth_LC
• Chinese_Numeric
• Custom
BookWithFM-Index
Template
Name of the template FrameMaker uses for generating the Index in the output.
MarkerTags
Specify the marker tags to include in the index. Delimit multiple marker tags with pipelines. Default
ma
rker tag type to include is Index.
PageNumbering
Set the page numbering flag for the index file using one of the following values:
• Restart: Restart page numbering from 1.
• Continue: Continue from previous file.
• ReadFromFile: Use the numbering value specified in the associated document.
PageNumberingValue
If you have specified PageNumbering as Restart, specify a number to hardcode the first page’s
number. Default value is 1.
PageNumberingFormat
Choose one of the following as the index page numbering format:
• Numeric
• Roman_UC
• Roman_LC
• Alpha_UC
• Alpha_LC
• Kanji
• Zenkaku
• Zenkaku_UC
• Zenkaku_LC
• Kanji_Kazu
• Daiji
• FullWidth
• FullWidth_UC
28
DITAFM-OUTPUT.INI SECTIONS AND FLAGS
CHAPTER 1 DITAFM-OUTPUT.INI
• FullWidth_LC
• Chinese_Numeric
Pagination
Specify the pagination of the index as:
• DoubleSided
• SingleSided
If you have selected the pagination as double sided, also set the FirstPageSide flag.
PageRounding
Set the page rounding flag as one of the following:
• MakeEven: FrameMaker makes the number of pages in the index even, if not already even, by
inserting a blank page in the end.
• MakeOdd: FrameMaker makes the number of pages in the index odd, if not already odd, by
inserting a blank page in the end.
• DontChange: FrameMaker does not change the number of pages in the index.
• DeleteEmpty: FrameMaker deletes the empty pages in the end of the index.
FirstPageSide
Use one of the following options to set the first page of the index file:
• ReadFromFile: Use the page side in the associated document.
• NextAvailable: Starts the index with a left page if the previous page in the book was a right one or
starts the index with a right page if the previous page in the book was a left one.
• Left: Use this value to start index with a left page.
• Right: Use this value to start index with a right page.
BookWithFM-ListofFigures
Template
Name of the template FrameMaker uses for generating ListofFigures in the output.
ElementTags
Specify the element tags to include in the ListofFigures. Delimit multiple elements tags with pipe-
lines.
ParaTags
Specify the para tags to include in the ListofFigures. Delimit multiple marker tags with pipelines.
Defa
ult marker tag type to include is figure.title.
PageNumbering
Set the page numbering flag for the ListofFigures file using one of the following values:
• Restart: Restart page numbering from 1.
29
DITAFM-OUTPUT.INI SECTIONS AND FLAGS
CHAPTER 1 DITAFM-OUTPUT.INI
• Continue: Continue from previous file.
• ReadFromFile: Use the numbering value specified in the associated document.
PageNumberingValue
If you have specified PageNumbering as Restart, specify a number to hardcode the first page’s
number. Default value is 1.
PageNumberingFormat
Choose one of the following as the ListofFigures page numbering format:
• Numeric
• Roman_UC
• Roman_LC
• Alpha_UC
• Alpha_LC
• Kanji
• Zenkaku
• Zenkaku_UC
• Zenkaku_LC
• Kanji_Kazu
• Daiji
• FullWidth
• FullWidth_UC
• FullWidth_LC
• Chinese_Numeric
Pagination
Specify the pagination of the ListofFigures as:
• DoubleSided
• SingleSided
If you have selected the pagination as double sided, also set the FirstPageSide flag.
PageRounding
Set the page rounding flag as one of the following:
• MakeEven: FrameMaker makes the number of pages in the ListofFigures even, if not already even,
by inserting a blank page in the end.
• MakeOdd: FrameMaker makes the number of pages in the ListofFigures odd, if not already odd, by
inserting a blank page in the end.
• DontChange: FrameMaker does not change the number of pages in the ListofFigures.
• DeleteEmpty: FrameMaker deletes the empty pages in the end of the ListofFigures.
30
DITAFM-OUTPUT.INI SECTIONS AND FLAGS
CHAPTER 1 DITAFM-OUTPUT.INI
FirstPageSide
Use one of the following options to set the first page of the ListofFigures file:
• ReadFromFile: Use the page side in the associated document.
• NextAvailable: Starts the ListofFigures with a left page if the previous page in the book was a right
one. Or starts the ListofFigures with a right page if the previous page in the book was a left one.
• Left: Use this value to start ListofFigures with a left page.
• Right: Use this value to start ListofFigures with a right page.
BookWithFM-ListofTables
Template
Name of the template FrameMaker uses for generating the ListofTables in the output.
ElementTags
Specify the element tags to include in the ListofTables. Delimit multiple element tags with pipelines.
ParaTags
Specify the para tags to include in the ListofTables. Delimit multiple marker tags with pipelines.
De
fa
ult marker tag type to include is table.title.
PageNumbering
Set the page numbering flag for the ListofTables file using one of the following values:
• Restart: Restart page numbering from 1.
• Continue: Continue from previous file.
• ReadFromFile: Use the numbering value specified in the associated document.
PageNumberingValue
If you have specified PageNumbering as Restart, specify a number to hardcode the first page’s
number. Default value is 1.
PageNumberingFormat
Choose one of the following as the ListofTables page numbering format:
• Numeric
• Roman_UC
• Roman_LC
• Alpha_UC
• Alpha_LC
• Kanji
• Zenkaku
• Zenkaku_UC
• Zenkaku_LC
31
DITAFM-OUTPUT.INI SECTIONS AND FLAGS
CHAPTER 1 DITAFM-OUTPUT.INI
• Kanji_Kazu
• Daiji
• FullWidth
• FullWidth_UC
• FullWidth_LC
• Chinese_Numeric
Pagination
Specify the pagination of the ListofTables as:
• DoubleSided
• SingleSided
If you have selected the pagination as double sided, also set the FirstPageSide flag.
PageRounding
Set the page rounding flag as one of the following:
• MakeEven: FrameMaker makes the number of pages in the ListofTables even, if not already even,
by inserting a blank page in the end.
• MakeOdd: FrameMaker makes the number of pages in the ListofTables odd, if not already odd, by
inserting a blank page in the end.
• DontChange: FrameMaker does not change the number of pages in the ListofTables.
• DeleteEmpty: FrameMaker deletes the empty pages in the end of the ListofTables.
FirstPageSide
Use one of the following options to set the first page of the ListofTables file:
• ReadFromFile: Use the page side in the associated document.
• NextAvailable: Starts the ListofTables with a left page if the previous page in the book was a right
one or starts the ListofTables with a right page if the previous page in the book was a left one.
• Left: Use this value to start ListofTables with a left page.
• Right: Use this value to start ListofTables with a right page.
BookWithFM-BookTitle
Template
Name of the template FrameMaker uses for generating the BookTitle in the output.
PageNumbering
Set the page numbering flag for the book title file using one of the following values:
• Restart: Restart page numbering from 1.
• Continue: Continue from previous file.
• ReadFromFile: Use the numbering value specified in the associated document.
32
DITAFM-OUTPUT.INI SECTIONS AND FLAGS
CHAPTER 1 DITAFM-OUTPUT.INI
PageNumberingValue
If you have specified PageNumbering as Restart, specify a number to hardcode the first page’s
number. Default value is 1.
PageNumberingFormat
Choose one of the following as the book title page numbering format:
• Numeric
• Roman_UC
• Roman_LC
• Alpha_UC
• Alpha_LC
• Kanji
• Zenkaku
• Zenkaku_UC
• Zenkaku_LC
• Kanji_Kazu
• Daiji
• FullWidth
• FullWidth_UC
• FullWidth_LC
• Chinese_Numeric
Pagination
Specify the pagination of the book title file as:
• DoubleSided
• SingleSided
If you have selected the pagination as double sided, also set the FirstPageSide flag.
PageRounding
Set the page rounding flag as one of the following:
• MakeEven: FrameMaker makes the number of pages in the file even, if not already even, by
inserting a blank page in the end.
• MakeOdd: FrameMaker makes the number of pages in the file odd, if not already odd, by inserting
a blank page in the end.
• DontChange: FrameMaker does not change the number of pages in the file.
• DeleteEmpty: FrameMaker deletes the empty pages in the end of the file.
FirstPageSide
Use one of the following options to set the first page of the file:
• ReadFromFile: Use the page side in the associated document.
33
DITAFM-OUTPUT.INI SECTIONS AND FLAGS
CHAPTER 1 DITAFM-OUTPUT.INI
• NextAvailable: Starts the file with a left page if the previous page in the book was a right one. Or
starts the file with a right page if the previous page in the book was a left one.
• Left: Use this value to start file with a left page.
• Right: Use this value to start file with a right page.
BookWithFM-ListOfPara
Template
Name of the template FrameMaker uses for generating the list of paras file in the output. If this
template is not specified the list of paras file is not created.
ElementTags
Name of the element tags to include in the list of paras file in the output. Use pipelines to delimit
mu
ltiple element names.
ParaTags
Name of the marker tags to include in the list of paras file in the output. Use pipelines to delimit
mu
ltiple para tag names.
BookWithFM-ListOfParaAlphabetical
Template
Name of the template FrameMaker uses for generating the (alphabetical para list) APL file in the
output. If this template is not specified the APL file is not created.
ParaTags
Name of the para tags to include in the APL file in the output. Use pipelines to delimit multiple para
tag names.
BookWithFM-ListofMarkers
Template
Name of the template FrameMaker uses for generating the list of markers file in the output. If this
tem
plate is not specified the file is not created.
MarkerTags
Name of the markers to include in the file. Use pipelines to delimit multiple marker names.
BookWithFM-ListofMarkersAlphabetical
Template
Name of the template FrameMaker uses for generating the alphabetical list of markers file in the
output. If this template is not specified the file is not created.
34
DITAFM-OUTPUT.INI SECTIONS AND FLAGS
CHAPTER 1 DITAFM-OUTPUT.INI
MarkerTags
Name of the markers to include in the file. Use pipelines to delimit multiple marker names.
BookWithFM-ListOfReferences
Template
Name of the template FrameMaker uses for generating the list of references file in the output. If
no template is specified, this file is not generated.
References
Name of the marker tags to include in the list of references file in the output. Specify the following
marker names in this flag delimited by pipelines: Fonts|Graphics|ExternXrefs|UnresolvedX-
refs|Conditions|UnresolvedTextInsets|TextInsets.
BookWithFM-IndexOfAuthors
Template
Name of the template FrameMaker uses for generating the index of authors file in the output. If no
template is specified, this file is not generated.
MarkerTags
Name of the marker tags to include in the index of authors file in the output. Use pipelines to
delimit multiple marker names. You can add one or more of the following markers:
Fonts|Graphics|ExternXrefs|UnresolvedXrefs|Conditions|UnresolvedTextInsets|TextInsets.
BookWithFM-IndexOfSubjects
Template
Name of the template FrameMaker uses for generating the index of subjects file in the output.
MarkerTags
Name of the marker tags to include in the index of subjects file in the output.
BookWithFM-IndexOfMarkers
Template
Name of the template FrameMaker uses for generating the index of markers file in the output. If a
template is not specified, this file is not generated.
MarkerTags
Name of the marker tags to include in the index of markers file in the output.
35
DITAFM-OUTPUT.INI SECTIONS AND FLAGS
CHAPTER 1 DITAFM-OUTPUT.INI
BookWithFM-IndexOfReferences
Template
Name of the template FrameMaker uses for generating the index of references file in the output.
If no template is specified, this template is not generated.
References
Name of the marker tags to include in the index of references file in the output. Specify the
following marker names in this flag delimited by pipelines: Fonts|Graphics|ExternXrefs|Unre-
solvedXrefs|Conditions|UnresolvedTextInsets|TextInsets.
36
REGINFO
CHAPTER 2 MAKER.INI
Maker.ini
Reginfo
Reginfo section and its flags are no longer used.
User
The user logged in to the computer when FrameMaker was installed.
Company
Name of the company. FrameMaker picks up the company name from the OS information.
RegNum
Registration number
ASN
Application serial number of FrameMaker.
Preferences
API
To enable the FDK client programs, set the API flag to On.
AskExit
When this flag is set to On, FrameMaker displays the OK to Exit FrameMaker? dialog box.
ShowErrors
Log / stop logging errors in the file ErrorFileName (for Off the console window is not displayed)
ErrorFileName
FrameMaker creates this file on every launch. This file stores console error and warning messages.
GreekSize
Specify a point size at which the text displayed on the screen is grayed out.
PadSize
Specify padding between an image and the anchored frame. Default value is 6.
RememberMissingFontName
Set this flag to decide whether FrameMaker preserves unavailable fonts’ names. When this flag is
s
e
t to On, FrameMaker remembers missing fonts’ names and replaces the relevant text with
diffe
rent fonts. When missing fonts are available again, such as on a different computer or after
installation, FrameMaker uses the correct fonts again.
37
PREFERENCES
CHAPTER 2 MAKER.INI
DisableAutofitAfterZoom
When you use the Fit Windows® to Text Frame option in the Zoom pop-up menu and then change
the zoom level, this flag determines whether the window resizes to fit the changed zoom level or
not. When you set this flag to
On and then change the zoom level, FrameMaker does not resize the
doc
ument window.
CrossPlatformFileNaming
This flag decides whether to alert you that the filenames you are saving may be illegal on one or
more platforms. These problems are about prohibited characters or length of the filenames.
Default settings: Windows® 9x/2000/NT
GetLibraryColorRGBFromCMYK
In FrameMaker 5.5.6 and later, this flag allows control of the display and printing of library colors.
The
four settings you can use with this option are:
• Printing: (Default option) Displays the RGB values from the library color description and prints the
RGB values converted from CMYK values.
• None: Displays and prints the RGB values from the library color description.
• Printing&Screen: Displays and prints the RGB values converted from CMYK values.
• Screen: Displays the converted RGB values and prints the RGB values from the library color descrip-
tion.
These options are for RGB printing only. The CMYK option always uses CMYK colors.
DefaultColorSpaceOverrideDistiller
This flag defines the default color space override for Distiller: RGB/CMYK. Default value is RGB.
ExecutablePlugins
Extension for executable plugins.
WrappedPlugins
Not supported in FrameMaker 11.
PluginExtensions
List the FrameMaker plugins here.
UseSystemCursor
Set this flag as On to use a custom system cursor instead of the built-in FrameMaker cursor. When
yo
u set this flag to On, FrameMaker uses the OS cursors for mouse actions such as Rotate or Drag.
BackupOnSave
Set this flag as On to create backup file when you save a file.
AutoSave
Number of minute after which FrameMaker automatically creates a backup file for the active file.
38
PREFERENCES
CHAPTER 2 MAKER.INI
ApiCoverage
API coverage file name. FrameMaker uses this file on shut down to store the coverage.
FMImage
This flag controls whether a FrameImage facet is saved with imported graphics by default. The
defa
ult value is off.
NetworkLock
If this flag is set to On, FrameMaker creates a lock file (.lck extension) for an open file. The lock file
prevents another user from opening and editing the same file. Another user, however, can view a
read-only copy of an open file.
InputMethodAutoActivation
Typing text in Asian fonts is accomplished using a special input device. FrameMaker can recognize
when
you are typing an Asian font and load this device automatically. By default, this flag is set to
On. If you set this flag to Off, use the appropriate command to load the input device.
CreateAllNamedDestinations
When this flag is set to On, FrameMaker creates all the possible named (all paragraphs and
e
l
ements) destinations. The On or Off value you set here is used a default value for the "Create all
nam
ed destinations" option in the PDFSetup dialog.
Snap
Set this flag to On to align new or moved graphics to snap grid.
Gravity
When you set this flag to On, gravity is enabled. Gravity ensures perfect alignment when drawing
or
resizing an object.
CtrlAltIsAltGr
If your keyboard does not have an Alt Gr key and you need it, set this flag as On. Now, you can use
the Ctrl and Alt keys together to achieve the same.
EnableUndoInFDK
Yes enables recording “undo” history in FDK APIs. Turn this option Off to improve performance of
certain FDK clients.
ClearHistoryOnSave
If this flag is set as On, FrameMaker clears the history on save.
NoFlashInPDF
When this flag is set to On, the Flash (SWF file) content in a FrameMaker document becomes inac-
tive in PDF. When this flag is set to Off, SWF files get embedded in the PDF and are playable.
No3DInPDF
When this flag is set to On, the U3D content in a FrameMaker document becomes inactive in PDF.
When
this flag is set to Off, U3D objects get embedded in the PDF.
39
PREFERENCES
CHAPTER 2 MAKER.INI
ConvertGraphicsToEPS
When this flag is set to On, when you save a FrameMaker file as PDF, the TIFF, PSD, and JPEG images
in the documents are converted to EPS.
SymbolSortingBeforeAlphaNumeric
When this flag is set to On, after the sorting of tags, the tags starting with symbols would appear
before tags with alphanumeric initials.
AlwaysDownloadURL
FrameMaker stores imported images as temporary files. If you import a file for the second time, the
file is not downloaded again. After importing an image file into FrameMaker, the changes that you
make in the file are not reflected in FrameMaker until you delete the temporary file and reimport
the image file.
To avoid having to delete the temporary file, set the AlwaysDownloadURL flag to On.
LocDisplayCriteria
When this flag is set to On, FrameMaker indicates the location of the object such as (variable,
m
a
rker, or conditional).
Related flags:
• LocParaStyle1
• LocParaStyle2
• LocElementType1
• LocElementType2
LocParaStyle1
When you set LocDisplayCriteria, as On, use this flag to specify first column’s title as para style’s
name in Pods. Default value is Heading1. This flag is relevant to Unstructured FrameMaker. For
m
o
re information on Pods, see FrameMaker Help.
LocParaStyle2
When you set LocDisplayCriteria, as On, use this flag to specify second column’s title as para style’s
name in Pods. Default value is Heading2. This flag is relevant to Unstructured FrameMaker. For
mo
re information on Pods, see FrameMaker Help.
LocElementType1
When you set LocDisplayCriteria, as On, use this flag to specify first column’s title as element name
in Pods. Default value is Element1. This flag is relevant to Structured FrameMaker. For more infor-
mation on Pods, see FrameMaker Help.
LocElementType2
When you set LocDisplayCriteria, as On, use this flag to specify second column’s title as element
name in Pods. Default value is Element2. This flag is relevant to Structured FrameMaker. For more
i
nfo
rmation on Pods, see FrameMaker Help.
40
PREFERENCES
CHAPTER 2 MAKER.INI
ReplaceCacheSize
If you have memory issues when doing replace all/replace in a book, or during similar operations,
reduce the replace cache size from the default 200.
RomanRanges
The code points between the start and end (inclusive) are treated as roman code range (While
rendering text, FrameMaker does not apply CJK rules to these ranges ).
NetLibTimeOut
The number of seconds to wait when connecting to the webdav server.
EnableHideChildWithParent
When this flag is set to On, FrameMaker hides child elements are also hidden along with parent
el
ement.
RepeatTypingEnabled
By default this entry is set to On. Set this entry to Off to disable the repeat typing operation.
RepeatEnabled
Enable/disable repeat last executed command.
AllowNewFileURL
This flag is for internal use only. Do not modify.
PostXSLTValidationOnExport
Whether or not to validate the file after “post close” XSLT is applied on XML.
DoNotExportInvalidXML
Whether to allow saving a file with invalid XML or not.
SuppressXMLWarnings
On file open, suppress XML parser validation warnings.
RemoveExtraWhiteSpacesOnXMLImport
When this flag is set to Yes, FrameMaker converts multiple contiguous white spaces to a single one.
T
hi
s option is useful while opening pretty printed (nested code) files.
OverwriteFileOnSPSUpload
Depreacted
NoMultimediaInPDF
If this flag is set to Off, FrameMake does not embed multimedia in the PDF.
DitaMapShowFileReferences
When this flag is set to On, FrameMaker displays only the file references in the Ditamap view.
F
r
ameMaker does not display the metadata elements as they are not file reference nodes.
41
PREFERENCES
CHAPTER 2 MAKER.INI
DitaMapShowNavtitle
When this flag is set to On, FrameMake displays the nav title element in the Ditamap view.
DirectOLESupportInXml
If this flag is turned On, while saving the XML files FrameMaker preserves the OLE objects (does not
co
nvert into a MIF reference). For more information on direct OLE support in XML, see FrameMaker
Help.
MultiMediaLinkTableRowLimit
Enter a value to limit the number of rows in the multimedia link table. This table is relevant when
yo
u create links to a graphic/multimedia in FrameMaker 11. It is possible for a graphic/multimedia
object to have hundreds of parts. Default value for this flag is
100. For more information on multi-
media links table, see FrameMaker Help.
FormViewUsesSmartPaste
When this flag is set to On, FrameMaker uses Smart Paste if you copy and paste content from
ex
ternal applications such as MS Word, Excel, or a browser. If the flag is set Off, the content from
external applications is pasted as plain text.
TranslateObjectOnDirectionChange
When this flag is on, if an object is placed 10 px from the left margin, changing the direction (RTL –
LTR
) will cause the object to be placed 10 px from the right margin. However, the orientation of the
object remains the same.
FlipObjectOnDirectionChange
When this flag is on, if an object is placed 10 px from the left margin, changing the direction (RTL –
LTR
) will cause the object to be placed 10 px from the right margin. The orientation of the object is
flipped (
mirrored).
createHighQualityJpeginSVG
This flag is used to set
SetPDFPortOptions, which decides whether the JPEG existing as graphic
in a SVG image should be created in high quality or not. Default value is 0.
ImportByReference
When this flag is on, all images are imported by reference. Default value is On.
ShowTabbedWelcomeScreen
Specifies whether the tabbed Welcome Screen is to be displayed by default or not. Default value is
On.
S
uppressExtensions
The SuppressExtensions setting controls which file extensions are suppressed when suppression is
enabled. By default, only
.fm and .book extensions are suppressed. If you want to disable all file
extension suppression, you can either disable extension suppression in the shell or edit
SuppressExtensions to have a blank value.
42
PREFERENCES
CHAPTER 2 MAKER.INI
API
To enable the FDK client programs, set the API flag to On.
Zoom
The zoom percent levels in the Zoom menu.
Default settings: 25, 50, 80, 90, 100, 120, 140, 150, 160, 200
Possible values: 25-1600
PenWidths
Pen widths in points (pt) for that appear in the Line Widths pop-up menu in the Tools palette. These
v
a
lues are updated every time you exit FrameMaker, using the current settings in the Line Widths
pop-up menu.
Default settings: 0.5, 1.0, 3.0, 4.0
Possible values: 0.15-360
Relevant user interface dialog: Line Width Options (Launched from the graphics toolbar)
ClipboardFormatsPriorities
Use this flag to control the clipboard paste options. You can tweak this flag’s values to ensure when
y
o
u paste from Microsoft® applications to FrameMaker, the pasted text appears as text, Unicode
text, OLE object, or any other format.
Default settings: FILE, MIFW, MIF, RTF, OLE 2, META, EMF, DIB, BMP, UNICODE TEXT, TEXT
Possible values: You can change the order of the values.
AutoMnemoniseMenus
This flag determines if mnemonic command shortcuts are shown on menus. Mnemonic shortcuts
ar
e underlined letters in command labels. When a menu is open, you can choose a command by
typing the underlined letter (for example, the O underlined in the Open command on the File
menu).
Possible values: On and Off
StickyPopupThreshold
This flag controls how long, in milliseconds, you must hold down the mouse button for pop-up
m
e
nus, such as the Zoom menu, to open. The preset value, 500, specifies an interval similar to that
for opening menus in the menu bar.
UseDisplayUnitInTemplate
When this flag is set to On, the default display units for the ruler, grid, and snap are based on the
doc
ument template. When this flag is set to Off, the values are taken from the ini file itself.
43
PREFERENCES
CHAPTER 2 MAKER.INI
DefaultRulerInch
Values in inches for the tick marks on the vertical and horizontal rulers in new documents. This
setting is applied only when UseDisplayUnitInTemplate is set to Off. Otherwise, FrameMaker uses
the values in the template.
DefaultRulerCm
Values in centimeters for the tick marks on the vertical and horizontal rulers in new documents.
Thi
s setting is applied only when UseDisplayUnitInTemplate is set to Off. Otherwise, FrameMaker
uses the values in the template.
DefaultGridInch
Values in inches for spacing of the visible grid lines in new documents. This setting is applied only
when U
seDisplayUnitInTemplate is set to Off. Otherwise, FrameMaker uses the values in the
template.
DefaultGridCm
Values in centimeters for spacing of the visible grid lines in new documents. This setting is applied
onl
y when UseDisplayUnitInTemplate is set to Off. Otherwise, FrameMaker uses the values in the
template.
DefaultSnapInch
Value in inches for the spacing of the snap grid lines in new documents. This setting is applied only
when U
seDisplayUnitInTemplate is set to Off. Otherwise, FrameMaker uses the values in the
template.
DefaultSnapCm
Values in centimeters for the spacing of the snap grid lines in new documents. This setting is applied
onl
y when UseDisplayUnitInTemplate is set to Off. Otherwise, FrameMaker uses the values in the
template.
UsePostscript
Set this option to On to use FrameMaker’s built-in methods of generating PostScript code. This
opti
on is faster and of higher quality. Set this option to Off to standard Windows® methods to
ge
nerate standard postscript code. Using this method, FrameMaker creates preview image of EPS
graphics instead of the PostScript image.
GDIRasterizeKiloPixelLimit
When getting the facet from PDF, limit the number of pixels we use in rasterizing.
MenuSet
FrameMaker has two built-in sets of menus for each product interface (FrameMaker and Struc-
tured FrameMaker). Complete menus are the menus and commands as described in the
Fr
ameMaker User Guide and in online Help. Quick menus are a subset of complete menus. You can
also create your own custom menu set. The MenuSet setting defines which set of menus appears
when you start. By default, the Complete menu set is used.
Possible values: Complete, Quick, and Custom
44
PREFERENCES
CHAPTER 2 MAKER.INI
ConfigWarnKbdRedundant
If you set ConfigWarnKbdRedundant to On, you see warning messages in the console window when
you load the customization (*.cfg) file if it contains redundant shortcut definitions.
ConfigWarnKbdOverride
If you set ConfigWarnKbdOverride to On, you see warning messages when you load the customiza-
tion file if it contains shortcut definitions for commands that already have shortcuts defined for
them
. The warning messages appear in the console window.
ForceFileTypeChoices
Set this flat to On, to display the Unknown File Type dialog every time you try to open an unknown
fil
e type in FrameMaker. The Unknown File Type dialog gives you an option to convert some file
type
s, such as Excel, Word, and Text, to a FrameMaker file. If you set this flag to Off, FrameMaker
dis
plays the message “Cannot open the file.”
Default is Off.
DisplayFileLeafFirst
When this flag is set to On, FrameMaker displays the filename in the title of the document or book
windo
w before the path.
AutoCollapseIconicPods
If this flag is set to On, when a pod is in iconic mode, clicking the icon of the pod in FrameMaker
opens the pod. When focus goes away from the pod it collapses to an icon.
AutoShowHiddenPods
If this flag is set to On, in the full screen mode of FrameMaker, the pods and toolbars appear in a
thin
dark-grey strip. Hovering over these pods and toolbars shows the pods and toolbars.
HidePodsOnClose
When you close pods they are hidden but are still active in the memory and may affect
FrameMaker’s performance. If you set this flag to Off, FrameMaker removes the pods when you
cl
ose them. To display them again, choose them from the FrameMaker menus.
Relevant user interface dialog: Preferences dialog (Edit > Preferences)
ShowMenuPathInCommandMenu
Specifies whether the full menu path should be displayed in the command search menu or not.
Defa
ult value is On.
OpenDocsAsTabs
Set this flag to On to enable displaying documents as tabs in FrameMaker.
HideSingleTabsInDocs
If this flag is set to On, when a floating document is solo, its single tab is not shown.
ShowNewWindowsDialogs
Specifies whether the new Windows file browsing dialog should be used or not. Default value is On.
45
PREFERENCES
CHAPTER 2 MAKER.INI
MissingGraphicsDialog
Not processed for FrameMaker 11.
UnresolvedCrossReferencesDialog
If this flag is set to On, FrameMaker displays the Unresolved Cross references dialog box while
ope
ning a document that has unresolved cross references.
OpeningOldReleaseDocDialog
If this flag is set to On, FrameMaker displays an alert while opening an older release document.
UnavailableFontsDialog
If this flag is set to On, FrameMaker displays an alert while opening a document with unavailable
fonts
.
DictionaryProviderMismatchDialog
If this flag is set to On, FrameMaker displays an alert while opening a document if the FrameMaker
current session’s dictionary provider does not match the document’s dictionary provider.
UnsupportedFileFormatForModeDialog
Suppress the alert that is displayed while opening a file format that is not supported in the current
mode.
UnsupportedFileFormatForViewDialog
Suppress the alert that is displayed while opening a file format that is not supported in the current
view.
LastActiveView
Last view, XML, Author, or WYSIWYG, active when user exited the FM session.
QuerySessionRestoreOnLaunch
If the last FrameMaker session ended in a crash and it can be restored, then on the next
Fr
ameMaker session launch ask if user wants to restore session.
LastUsedWorkSpaceInStructuredMode
Name of the Last Used WorkSpace in the structured mode.
LastUsedWorkSpaceInUnstructuredMode
Name of the Last Used WorkSpace in the unstructured mode.
LastUsedWorkSpaceInXMLAuthorMode
Display the last used workspace in the FrameMaker XML Author mode.
EnableAutoSpellCheck
Enable/disable auto spell check.
EnableOldSmartInsert
If the flag is set to On, the FrameMaker 11 Smart Insert functionality is enabled. Default: Off.
46
PREFERENCES
CHAPTER 2 MAKER.INI
LoadStartupScripts
Set the flag to On to load the ExtendScripts on start-up. Default: Off.
LoadAdobeFontsOnStartup
Set the flag to On to load the fonts in the adobe directory on start up. Default: Off.
DelayLoadClients
Set to On to load all clients in idle loops after FrameMaker launches. Default: Off.
DontLoadStartupScripts
The list of script which you do not want to load on start up.
RegularExpressionSyntax
Specify the engine to use in regular expression search and replace. Possible options:
• egrep
• grep
• Perl
ForceAsianLayout
Use this flag to toggle the usage of Asian layout (RTL) engine. Default is Off.
BookZoomPercentage
This flag controls the zoom percentage of the book window. Default value is 100.
CMSZoomPercentage
This flag controls the zoom percentage of the Repository Manager window. Default value is 100.
ProjectZoomPercentage
This flag controls the zoom percentage of the project window. Default value is 100
DitamapZoomPercentage
This flag controls the zoom percentage of the DITA map window. Default value is 100.
FindStrings
This flag saves the strings searched in the Find/ Change dialog. A history of searched strings is main-
tained across FrameMaker sessions.
ChangeStrings
This flag saves the strings changed through the Find/Change dialog. A history of changed strings is
m
a
intained across FrameMaker sessions.
RetainTempFileWhenNotExportingInvalidXML
Whether or not to retain the invalid xml in the temp directory while saving an XML file. The user
may want to see the temp file for errors.
ApplyDestCondOnPastedText
Set this flag to On to paste conditional content using the destination document’s settings.
47
PREFERENCES
CHAPTER 2 MAKER.INI
ApplyCondTillElementBoundaries
Set this flag to On to apply conditional text to complete elements rather than part text inside the
element.
EPSLevelForPlacedPDF
The EPSLevelForPlacedPdf specifies the level of EPS to use for placed PDF images. By default,
FrameMaker prints imported PDF (Placed PDF) files by converting them to Level 2 EPS files. Use this
setting to specify Level 1 or Level 2.
ZoomScale
Structure window zoom value.
ElemFontJapanese
Structure window element font for Japanese.
ElemFontKorean
Structure window element font for Korean.
ConfigurationFilePath
Global file path to read XML attributes.
ElemFontTraditionalChinese
Structure window element font for traditional Chinese.
ElemFontSimplifiedChinese
Structure window element font for simplified Chinese.
hpWarning
This flag controls whether or not FrameMaker displays "history will be cleared, can't undo" alert.
UndoHistorySize
Size of undo list.
CopyFileInfoOnImport
Allow/disable import of file Info.
DontShowWelcomeScreen
Set this flag to On, to hide the FrameMaker welcome screen.
CheckoutOnOpen
If set, checkout http files on open.
UploadOnSave
If set, upload http files on save.
FirstRunOpenDoc
First file to be opened in FrameMaker during the first launch.
48
PREFERENCES
CHAPTER 2 MAKER.INI
SplashScreen
Set this flag to On, to display splash screen on FrameMaker launch. Default is On.
NonWriteableIniAlert
Set this flag to On to display an alert when FrameMaker cannot write/update the maker.ini file.
Defa
ult is On.
SuppressFontAlertOnOpen
Set this flat to On to suppress the missing font dialog when you open a document. Default is Off.
SuppressLangAlertOnOpen
Set this flag to On to suppress alerts when opening document about some of the languges used in
the
document aren't available with FM. Default is Off.
ElemFont
Use this flag to specify the font name of the structure window element.
ElemSize
Use this flag to specify the font size of the structure window element.
AttrFont
Structure window attribute font name.
AttrSize
Structure window attribute font size.
AttrValFont
Structure window attribute value font name.
AttrValSize
Structure window attribute value font size.
KeywordFont
Structure window keyword font name.
KeywordFontSize
Structure window keyword font size.
AttrErrSym
Structure window attribute error symbol.
AttrSepSym
Structure window attribute separator symbol.
ExpandSym
Structure window expand symbol.
49
PREFERENCES
CHAPTER 2 MAKER.INI
CollapseSym
Structure Window collapse symbol.
AttrNoneSym
Structure window attribute none symbol.
AttrSomeSym
Structure window attribute some symbol.
AttrAllSym
Structure window attribute all symbol.
JapaneseImperialEra
Japanese imperial era date strings. Enter the date in the following format: DD MM YY Name | DD
MM
Y
Y Name | DD MM YY Name |. The most recent era should come first followed by older ones.
The
last item is the era after "Heisei" era.
WMFPrintOption
Set this flag to 2 to convert wmf to emf during printing.
PluginCache
Plugin directory cache. Specify the directory for FrameMaker plugins.
FontCache
Font directory cache. This file will cache the information FrameMaker stores in the SBX files. On
s
ta
rtup, FrameMaker reads the info from the cached file instead of opening and reading each file
every time.
PreventDocTabbingWhenDragging
Set this flag to On to preven document tabbing while dragging.
OpenCompDocsAsTabs
Set this flag to On to allow opening composite documents as tabs.
ToolTipMode
Set this flag to Normal, Fast, or Hidden to define the tooltip appearance mode.
UIBrightness
FrameMaker UI brightness: light or dark.
UseGrayScaleAppIcon
Whether to use greyscale application icon or not.
MaxMruListSize
Limit of recent files list.
InsetFilePathForMissingPoster
Enter the name of the file to be used as a poster if the actual poster is not valid/readable.
50
PREFERENCES
CHAPTER 2 MAKER.INI
EnableOleOptimization
Optimize handling of OLE objects.
ApplyAsCondition
Show/hide the following options in the manage attribute expressions dialog:
• Ditaval as condition
• Apply condition tag
• Remove if previously applied
UnsupportedHotspotShapesDialog
When this option is set to On, if there are unsupported hotspot shapes in an fm file, FrameMaker
dis
plays the Unsupported Hotspot Shapes dialog when generating PDF.
ShowLearningResourcesOnStarterPage
Whether to show learning resources on the welcome screen.
LastActiveViewInXMLAuthorMode
Display the last active view in FrameMaker XML Author mode.
OpenDocOnDragDrop
Open a document that is dragged on to the document window.
ImageDefaultRunaroundStyle
Set the initial (default) value for runaround style of an image when the image is inserted in a
F
rameMaker document. Possible values:
• Contour
• BoundingBox
• None
ToolBarIconsSize
Specify the size of toolbar icons. Possible values:
• Large
• Small
ToolBarIconsColor
Specify the color option of toolbar icons. Possible values:
• Colored
• Monochrome
PrefGridView
Set the flag to On to view the grid lines in all open documents in the current session.
PrefGridViewValue
Use this flag and specify the grid line spacing. Default value is 0.
51
PREFERENCES
CHAPTER 2 MAKER.INI
PrefRulersView
Set the flag to On to view the vertical and horizontal rulers in all open documents in the current
session.
PrefRulersViewValue
Use this flag and specify the scaling value of the ruler. Default value is 0.
PrefBordersView
Set the flag to Onto view the border of the text frame in all open documents in the current session.
PrefSymbolView
Set the flag to On to view text symbols like an end of paragraph, anchored frame, table or other
fo
r
matting information in all open documents in the current session.
PrefHotSpotIndicator
Set the flag to On to view the hotspot indicators in all open documents in the current session.
PrefElementBoundaryAsBracket
Set the flag to On to view element boundaries as square brackets around the content in all open
doc
uments in the current session.
PrefElementBoundaryAsTag
Set the flag to On to view the tag names as element boundaries around the content in all open
documents in the current session.
ShowInAppMessages
Set this flag to On to enable the contextual tips in FrameMaker.
EnableStandardLigaturesForFonts
This flag lists the font names that allows standard ligatures.
PrefShowStructTextValue
Set this flag to On to show the topic’s content in the Structure View of the document.
ThorMessageShown
This flag is not available by default, however you can add it in the
maker.ini file. This flag controls
the display settings for the dialog box that appears on first launch of FrameMaker. After displaying
the dialog box, this flag is turned off.
AutoScaleImageInTableCell
This flag has been deprecated from FrameMaker 2020 Summer release Update 2 and later versions.
AutoScaleImageAlongWidth
This flag is not available by default. However, you can add it to the maker.ini file. This flag
controls the auto-scaling behavior of an image - be it in an anchored frame, table cell, or side head.
By default, when you insert an image, it is not scaled down to fit into the anchored frame, table cell,
or side head. If you want to enable auto-scaling, then add this flag and set its value to
On.
52
DROPBOXPREFERENCES
CHAPTER 2 MAKER.INI
CMSCheckoutWithDepDefault
This flag is not available by default, however you can add it in the maker.ini file. This flag controls
the checkout behavior of dependent files behavior in SharePoint and Documentum. By default,
when you checkout a file in SharePoint or Documentum, the dependent files are checked out along
with the parent file, this corresponds to
On value of the flag. If you want to disable checkout of
dependent files and only want to check out the parent file, then add this flag and set its value to Off.
UsePDFResolution
This flag is not available by default, however you can add it in the maker.ini file. This flag controls
the resolution of the PDF output. When you generate the PDF output for a document with page size
bigger than A4, some content may not fit on the page and not get published properly. To prevent
the loss of content, add this flag and set its value to
300.
DropBoxPreferences
DefaultDropBoxFolder
Set the default Dropbox folder.
CreateFolderStructureInDropBox
Allow user to define a folder structure to push all dependent files into Dropbox folder.
RemoveFileWhileMovingFromDropBox
Delete files from disk after the files are uploaded to Dropbox folder.
DisableWarningWhileMovingFromDropBox
Disable alerts that display when you delete files from disk, while moving to Dropbox folder.
Fonts
DisplayUsingPrinterMetrics
Set this flag to On to display the text in FrameMaker using the printer metrics, so that the dimen-
sions and spacing of the glyphs match with the printer output.
When you set this flag to Off, FrameMaker uses the screen metrics instead of printer metrics and
printed output may differ from how the content appears on the screen.
Sizes
Specify a point size of the font, such as 7pt, 8pt, 9pt, 10pt, 11pt, 12pt, 14pt, 18pt, 24pt, or 36pt.
Angles
Specify a font angle, such as Regular, Kursiv, Slanted, Oblique, Italic, or Obliqued. If you specify any
othe
r font angle, FrameMaker uses Italic.
53
CMSFAVORITES
CHAPTER 2 MAKER.INI
Variations
Specify one of the following as a font variation: UltraCompressed, ExtraCompressed, Compressed,
Condensed, Narrow, Regular, Wide, Poster, or Expanded.
Weights
Specify one of the following as the font weight: Thin 100, ExtraLight 200, SemiLight 250, Light 300,
Book 300, Regular 400, Medium 500, SemiBold 600, DemiBold 600, Bold 700, ExtraBold 800,or
Heavy 900.
DefaultJapaneseFamily
Default Japanese font family.
DefaultKoreanFamily
Default Korean font family.
DefaultSimplifiedChineseFamily
Default simplified Chinese font family.
DefaultTraditionalChineseFamily
Default traditional Chinese font family.
DefaultJapaneseDialogFont
Default font for Japanese dialogs.
DefaultKoreanDialogFont
Default font for Korean dialogs.
DefaultSimplifiedChineseDialogFont
Default font for simplified Chinese dialogs.
DefaultTraditionalChineseDialogFont
Default font for traditional Chinese dialogs.
BannerFont
Specify a font for the Banner window.
NonTextFamilies
Add FrameMaker font family names that are not spellchecked.
CMSFavorites
DctmOverwriteObjectOnUpload
This flag is relevant to Documentum®. If this flag is set to On, when you upload a file, Documentum®
overwrites the server copy. If this flag is set to Off, Documentum® creates versions and does not
ov
erwrite the copy.
54
CMSFAVORITES
CHAPTER 2 MAKER.INI
DctmOverwriteObjectAsVersion
This flag is relevant to Documentum®. Only if DctmOverwriteObjectOnUpload is set to Off, this flag
is relevant.
This flag can have one of the following values:
• 0: The file is uploaded as the same version.
• 1: The file is uploaded as major version.
• 2: The file is uploaded as minor version.
ShowHiddenObjects
This flag is relevant to Documentum® only.
When this flag is set to On, FrameMaker displays the hidden objects in the tree view.
ShowPrivateCabinets
This flag is relevant to Documentum® only.
When this flag is set to On, FrameMaker displays the private cabinets in the tree view.
DfsSdkPath
This flag is relevant to Documentum® only.
Specify a path for the DFS SDK.
SpOverwriteObjectOnUpload
This flag is relevant to Sharepoint.
If this flag is set to On, when you upload a file, Sharepoint overwrites the server copy. If this flag is
s
e
t to Off, Sharepoint creates versions and does not overwrite the copy.
SpOverwriteObjectAsVersion
This flag is relevant to Sharepoint. Only if SpOverwriteObjectOnUpload is set to Off, this flag is rele-
vant.
This flag can have one of the following values:
• 1: The file is uploaded as major version.
• 2: The file is uploaded as minor version.
DitaExchangeOverwriteObjectOnUpload
This flag is relevant to DITA Exchange.
If this flag is set to On, when you upload a file, DITA Exchange overwrites the server copy. If this flag
i
s
set to Off, Dita Exchange creates versions and does not overwrite the copy.
DitaExchangeOverwriteObjectAsVersion
This flag is relevant to DITA Exchange. Only if DitaExchangeOverwriteObjectOnUpload is set to Off,
this flag is relevant.
55
DIRECTORIES
CHAPTER 2 MAKER.INI
This flag can have one of the following values:
• 1: The file is uploaded as major version.
• 2: The file is uploaded as minor version.
Null
List of custom attributes, attribute data types, and attribute types for SharePoint.
Null
List of custom attributes, attribute data types, and attribute types for Documentum.
Directories
LanguageDir
This flag specifies the language directory for FrameMaker, which has files such as hyphenation
settings and language dictionaries for spell-checking.
TemplateDir
Name of the folder that has standard FrameMaker templates.
FilterDllDir
FilterDllDir specifies the folder that contains the filters installed on your system.
OpenDirOnStart
The default directory for file open/save dialogs.
ToolbarCustomImageDir
FrameMaker uses this flag to determine location of custom toolbar icons.
PaletteDir
FrameMaker uses this flag to determine location of template browsers.
PaletteDirStructure
FrameMaker uses this flag to determine templates, such as structure window, error log, and
e
l
ement catalog.
AlwaysOnTopPaletteDir
Palettes in AlwaysOnTopPaletteDir always float in front of documents.
ColorLib
ColorLib specifies the folder that contains color library files. FrameMaker reads these files in at
sta
rtup and displays them in the Color Libraries pop-up menu in the Color Definitions dialog box.
You can add any library file formatted in the ASCII Color Format (.acf), version 2.1 or earlier, or in
the Binary Color Format (.bcf), version 2.0. You can’t use a FrameMaker product to save a .bcf
library file.
56
FILES
CHAPTER 2 MAKER.INI
FontDir
Do not change this flag’s value.
Directory containing FrameMaker’s fonts.
UnicodeDir
Do not edit.
This flag specifies the folder that contains Unicode files that are used to support Asian text in
A
crobat bookmarks and other Acrobat features.
Samples
Directory of FrameMaker sample files
Clipart
Sample clipart files
Templates
Sample FrameMaker templates
SgmlDir
Location of SGML applications for Structured FrameMaker
XmlDir
Location of XML applications for Structured FrameMaker
StructureDir
Path of the FrameMaker Structured directory, which contains SGML application, XML Applications,
a
nd
default read/write rule files.
Files
UserDictionary
Location of FrameMaker’s user dictionary file.
SiteDictionary
Location of FrameMaker’s site dictionary file.
CustomDoc
The template for creating a FrameMaker custom document.
AsciiTemplate
The template for creating a custom text document.
EquationDoc
The equations palette
57
FILES
CHAPTER 2 MAKER.INI
ThesaurusDoc
The Thesaurus dialog box
TemplateBrowserDoc
The Templates browser when running with the FrameMaker product interface.
RunWrappedPlugin
Extension for wrapped plugin.
MarshallingDLL
List of DLLs for marshalling.
StructTemplateBrowserDoc
The structured template browser file.
VerticalQuickAccessBar
The file used as a template file for the FrameMaker's Vertical Quick Access bar.
InsetFilePathForMissingPoster
The file to be used as a poster if the specified poster file is missing.
TransformationFilePath
The default XSLT transformation file. For more information on XSLT transformations, see
FrameMaker Help.
WordImportPresetFilePath
This flag defines the preset file path for Word import.
ConfigMenuFile
The Menu configuration file for Unstructured FrameMaker.
ConfigMenuFileStructure
The Menu configuration file for Structured FrameMaker.
ConfigMenuFileXMLAuthor
The Menu configuration file for FrameMaker XML Author.
ConfigMathFile
The Math commands configuration file for FrameMaker.
ConfigMathFileXMLAuthor
The Math commands configuration file for FrameMaker XML Author.
MSWinConfigCommandsFile
The Windows commands configuration file for FrameMaker.
MSWinConfigCommandsFileXMLAuthor
The Windows commands configuration file for FrameMaker XML Author.
58
SPELLINGPROVIDERPREFERENCES
CHAPTER 2 MAKER.INI
ToolBarXMLFile
The toolbar configuration file for FrameMaker.
ToolBarXMLFileXMLAuthor
The toolbar configuration file for FrameMaker XML Author.
ClientCommandsDescFile
The command description file to add corresponding description of the commands created by client.
B
y
default, the command descriptions are stored in the <FrameMaker_install_loca-
tion>\fminit\configui\ClientCmdDesc.cfg file.
SpellingProviderPreferences
Name of the spelling service provider and languages supported. For example, in the following entry,
Proximity is the service provider and US English and UK English are the languages that Proximity supports:
Proximity=US English,UK English
To add more languages to a provider, add comma-separated language names.
HyphenationProviderPreferences
Name of the hyphenation service provider and languages supported. For example, in the following entry,
Proximity is the service provider and US English and UK English are the languages that Proximity supports
for
hyphenation:
Proximity=US English,UK English
To add more languages to a provider, add comma-separated language names.
ThesaurusProviderPreferences
Name of the thesaurus service provider and languages supported. For example, in the following entry,
Proximity is the service provider and US English and UK English are the languages that Proximity supports
for
thesaurus:
Proximity=US English,UK English
To add more languages to a provider, add comma-separated language names.
DialogLayout
MakerWin
Use this flag in the maker.ini file in Application Data (Application Data\Adobe\FrameMaker\11).
The values for MakerWin specify normal, minimized, and maximized positions. The first value
59
DIALOGLAYOUT
CHAPTER 2 MAKER.INI
determines which position to use; its value is 1 for normal, 2 for minimized, or 3 for maximized. The
next six values are pairs of x and y offsets that specify the different window positions; the first pair
specifies the minimized position, the second pair specify the maximized position, and the third pair
specify the normal position. The last two values are the normal window width and height.
PCatalog
The settings for the Paragraph Catalog (PCatalog) specify first an x and y value for the location of
the
catalog. The x value specifies the offset in pixels from the left side of the screen. The y value
specifies the offset in pixels from the top of the screen. Optionally, the width and height of the
catalog, in pixels, appear after the x and y values.
CCatalog
Just like PCatalog, the settings for the Character Catalog (CCatalog) specify first an x and y value for
the
location of the catalog. The x value specifies the offset in pixels from the left side of the screen.
The y value specifies the offset in pixels from the top of the screen. Optionally, the width and height
of the catalog, in pixels, appear after the x and y values.
Equation
Use this flag in the maker.ini file in Application Data (Application Data\Adobe\FrameMaker\11).
The
values for this flag are x and y offsets that specify the window position.
Possible values: Numerical values of x and y offsets that specify the window position.
Relevant user interface dialog: Equations
Numbering
Use this flag in the maker.ini file in Application Data (Application Data\Adobe\FrameMaker\11).
T
he
values for this flag are x and y offsets that specify the window position.
Thesaurus
Use this flag in the maker.ini file in Application Data (Application Data\Adobe\FrameMaker\11).
The values for this flag are x and y offsets that specify the window position.
TemplateBrowser
Use this flag in the maker.ini file in Application Data (Application Data\Adobe\FrameMaker\11).
The
values for this flag are x and y offsets that specify the window position.
Relevant user interface dialog: The Template browser dialog (Standard Templates/Structured
Templates)
VerticalQuickAccessBar
FrameMaker (9 and prior) vertical toolbar properties.
VQuickAccessBar
FrameMaker (9 and prior) vertical toolbar properties.
ConsoleWin
Do not modify. Last used position/placement coordinates of the console window.
60
VIEWCLIENTS
CHAPTER 2 MAKER.INI
StructureWindowDoc
Template for structure window.
TagFont
Font family of text used in tags of structure window. Default is Helvetica.
SnipFont
Font family of text snippet dispayed for text nodes in the struct window.
TagSize
Font size of text used in tags of struct window tags.
SnipSize
Font size of text snippet dispayed for text nodes in the struct window.
Origin
Starting point from where structure tree would be shown in the struct window.
SnipPos
Starting point coordinates from where text snippet would be displayed in the struct window.
Position
Coordinates of the structure window.
MenuSet
Possible values for the Menu set: Custom, Quick, or Complete. Default is Complete.
ViewClients
This section mentions the three views of FrameMaker: WYSIWYG, XML, and Author. To disable a view in
FrameMaker, use a semicolon to comment out the relevant line.
WYSIWYG View
WYSIWYG view’s settings. The first entry specifies whether the view is an internal one or plug-in
bas
ed. The second entry specifies if the view is relevant to Structured or Unstructured FrameMaker
(All = Structured and Unstructured FrameMaker). The third entry specifies the name of the view.
The fourth entry specifies the DLL file for the plug-in. If the view is an internal one, the fourth entry
is
null. The fifth and the last entry is the name of the image file for the icon used for the view in
Fr
ameMaker.
Default settings: internal,all,wysiwyg view,null,PL_SwitchToWYSIWYG
Possible values: To disable this view in FrameMaker, use a semicolon to comment out the settings.
Author View
Author view’s settings. The first entry specifies whether the view is an internal one or plug-in based.
T
he
second entry specifies if the view is relevant to Structured or Unstructured FrameMaker (All =
61
XSLTPROCESSORS
CHAPTER 2 MAKER.INI
Structured and Unstructured FrameMaker). The third entry specifies the name of the view. The
fourth entry specifies the DLL file for the plug-in. If the view is an internal one, the fourth entry is
null. The fifth and the last entry is the name of the image file for the icon used for the view in
Fr
ameMaker.
Default settings: internal,structured,author view,null,PL_SwitchToAV
Possible values: To disable this view in FrameMaker, use a semicolon to comment out the settings.
XML View
XML view’s settings. The first entry specifies whether the view is an internal one or plug-in based.
T
he
second entry specifies if the view is relevant to Structured or Unstructured FrameMaker (All =
Structured and Unstructured FrameMaker). The third entry specifies the name of the view. The
fourth entry specifies the DLL file for the plug-in. If the view is an internal one, the fourth entry is
null. The fifth and the last entry is the name of the image file for the icon used for the view in
Fr
ameMaker.
Default settings: plugin,structured,xml view,FMXmlView.dll,PL_SwitchToXmlView
Possible values: To disable this view in FrameMaker, use a semicolon to comment out the settings.
XSLTProcessors
Use these settings to specify the path of XSLT processors. Ensure that all dependent jars of a processor
are in the same directory. If you do not specify a processor as default, the processor mentioned first
becomes the default XSLT processor.
XALAN
Specifies the path of the XALAN processor on the computer. FrameMaker uses this path to locate
the XALAN processor for XSLT processing. Suffix the path with, Default to make the XALAN
pro
cessor the default processor.
SAXON
Specifies the path of the SAXON processor on the computer. FrameMaker uses this path to locate
the
SAXON processor for XSLT processing. Suffix the path with, Default to make the SAXON
pro
cessor the default processor.
APIClients
The [APIClients] section lists FDK clients (plug-ins) to start when FrameMaker starts. Each client descrip-
tion must be on a separate line.
Descriptions for clients that are not filters use the following format:
clientName=ClientType, description, path, mode
62
APICLIENTS
CHAPTER 2 MAKER.INI
For example, the Mailer client setting looks like:
Mailer=Standard, Send Mail API Client, fminit\mailer.dll,all
Clients that are filters use the following format:
clientName=ClientType, [facet, format_ID, vendor_id, display_name, ]
description, path, mode, extension
For example, the RTF filter client setting looks like:
Argument Specify
clientName The plug-in name
ClientType The client type—valid types for non-filter clients are Standard, TakeControl,
and
DocReport
description A string describing the FDK client
path The path of the client’s DLL file—can be an absolute path, or relative to the
ins
tall directory
mode Which mode of FrameMaker is valid for this client—can be one of makers,
structured, or all
Argument Specify
clientName The filter name
ClientType The filter type—one of FileToFileTextImport, FileToFileGFXImport, or
ExportFilter
facet The format of the original file—For graphic files, FrameMaker saves this facet
along with the filtered representation of the graphic
format_id The dot-extension of the file that identifies its format—for example, .rtf, .bmp,
or .cgm
vendor_id A four-character maximum string that identifies the vendor
display_name The name to display in dialog boxes when the user chooses the filter
description A string to describe the filter
path The path of the filter’s DLL file—can be an absolute path, or relative to the
i
nstall directory
mode Which mode of FrameMaker is valid for this filter—can be one of makers,
structured, or all
63
DASHPATTERNS
CHAPTER 2 MAKER.INI
RTF=TextImport, RTF, RTF, FAPI, RTF, Rich Text Format (RTF) Import,
filters\rtfimprt.dll, all, ^.rtf
To create a client, you need the Frame Developer’s Kit (FDK) for Windows®. If you are installing an FDK
client, follow instructions provided with the client to add its startup information to the initialization file.
You can also load API clients simply by placing them in the Plugins folder and then starting FrameMaker.
DashPatterns
The [DashPatterns] settings define the eight dash pattern choices that appear in the Dashed Line Options
dialog box. You can edit these settings to replace the standard choices with custom ones:
1=Dash, 8, 6
2=Hidden, 4
3=Longdash, 16, 10
4=Dot, 2, 4
5=Dash-Dot, 12, 6, 2, 6
6=Dash-Dot-Dot, 12, 6, 2, 6, 2, 6
7=Chain, 12, 6, 6, 6
8=Phantom, 20, 6, 6, 6, 6, 6
Each dash pattern contains a label that identifies the dash pattern in the Dashed Line Options dialog box
and a repeating series of dash and gap segment lengths. Dashes and gaps are measured in points. The
following illustration shows a dashed line and its segment description. The line is made up of a 12-point
dash, a 6-point gap, a 6-point dash, and another 6-point gap. This pattern repeats to draw a dashed line
of any length.
If a dash pattern setting contains an odd number of segment lengths, the last dash value is repeated for
the
final gap. For example, the following setting describes a dash pattern with 4-point dashes and 4-point
gaps:
2=Hidden, 4
The dash pattern label cannot contain spaces or punctuation marks.
Thermometers
A thermometer is a horizontal bar that shows progress during operations that can take some time. One
color, on the left of the bar, represents the percentage of the operation that is complete. Another color,
on the right of the bar, represents the percentage remaining. The thermometer updates as the operation
progresses. The [Thermometer] settings specify colors to use in thermometers as red, green, and blue
(RGB) values. You can change these values to specify different colors.
ThermoDoneColor=255, 0, 255
ThermoRemainingColor=192, 192, 192
64
DOCCOMPARE
CHAPTER 2 MAKER.INI
DocCompare
CreateSummaryOnly
This flag sets the Create radio buttons in the Compare Documents and Compare Books dialog
boxes. When this setting is On, only a summary document is created. When this setting is Off, both
sum
mary and composite documents are created.
MarkInsertedText
This flag controls the standard choice for marking insertions. You can choose:
• ConditionInserted: The standard Inserted condition
• ConditionTag: A custom condition
• Nothing
Edit the file so the option you want is the only one without a semicolon before it. If you choose a
custom condition for inserted text, specify its tag with the InsertConditionTag setting.
MarkDeletedText
This flag controls the standard choice for marking deletions. You can choose:
• ConditionDeleted: The standard Inserted condition
• ConditionTag: A custom condition, ;
• ReplacementText: Replacement text
Edit the file so the option you want is the only one without a semicolon before it.
Related flags:
• DeleteConditionTag
• DeleteReplacementText
DeleteConditionTag
If you choose a custom condition for MarkDeletedText, specify the condition tag in the DeleteCon-
ditionTag setting.
DeleteReplacementText
If you choose replacement text for the MarkDeletedText setting, add the replacement text as a text
string in the DeleteReplacementText setting (in place of the ^).
AddChangeBars
Set this flag to On to add change bars to the composite document.
InsertHyperTextLinks
Set this flag to On to add hypertext links to the summary document.
CompareAttributesForElements
Set this flag to On to compare elements’ attribute values also during doc comparison.
65
SPELLING
CHAPTER 2 MAKER.INI
ThresholdFactor
This flag controls when to mark an entire paragraph or table cell as changed. The preset value is 75;
an entire paragraph is marked as changed if 75 percent or more of the words are changed. You can
increase or decrease this percentage.
Spelling
The flags in the Spelling section in the initialization file define the options for spell-checking and specify
which style of quotation marks to use.
You can change any On setting to Off (and vice versa) and specify different characters in the last four
li
nes. These values are updated every time you exit, using the current settings in the Spelling Checker
Options dialog box.
NOTE: If you edit FindTwoInARow, IgnoreWordsContaining, FindSpaceBefore, and FindSpaceAfter, be sure
to leave a space between the On/Off toggle and the character or group of characters to the right of it.
AdobeLinguisticsPath
The directory path to the FrameMaker linguistics folder.
UserDictModifiedTime
Last modified time of user dictionary.
SiteDictModifiedTime
Last modified time of site dictionary.
BannerText
Banner text appears in elements in Structured FrameMaker and instructs you on what content should go
into an element. The flags in the BannerText section allow you to format and control the BannerText.
BannerTextTextColor
Specify the color of the banner text for the structured documents. Default value is Black.
BannerTextFontAngle
Specify an angle of the banner text (Regular, Italic or As Is)for the structured documents.
BannerTextFontVariation
Specify a variation of the font width: UltraCompressed, ExtraCompressed, Compressed, Condensed,
Narrow, Regular, Wide, Poster, or Expanded.
BannerTextBKColor
The background color of banner text that distinguishes it from the text in the document. To change,
s
pecify any color present in the document. To see available color names, click View > Color > Defi-
nitions in FrameMaker.
66
FONTANGLEALIASES
CHAPTER 2 MAKER.INI
RedisplayBannerTextForEmptyElements
Off: Banner text in a file does not reappear if you delete it once or save the file and reopen it.
On: Banner text reappears after you delete it or save and reopen the file.
FontAngleAliases
Windows fonts use different font angles even when font names are the same as on other platforms. The
settings under [FontAngleAliases] assign angles used on other platforms to Windows angles and weights.
Defaults:
[FontAngleAliases]Obliqued=Oblique
FontWeightAliases
Windows fonts use different font weights, even when font names are the same as on other platforms.
The settings under [FontWeightAliases] assign weights used on other platforms to Windows weights.
Defaults:
[FontWeightAliases]Medium=RegularRoman=RegularSemi=SemiBoldDemi=DemiBoldB
olded=Bold
WindowsToFrameFontAliases
Each setting under [WindowsToFrameFontAliases] assigns a Windows font to a FrameMaker font name.
Thus, font information appears in the Windows interface as it does in other versions of FrameMaker. For
example, Helvetica Narrow is normally a font family in Windows, but with aliasing Helvetica appears as
a font family and Narrow appears as a variation in the Character Designer and Paragraph Designer.
Font aliasing also makes it possible to go back and forth easily between Windows and other platforms.
Fr
ameMaker automatically converts Windows fonts to their FrameMaker equivalents for you.
The settings under [WindowsToFrameFontAliases] use this syntax:
Windows-font [angle|*], [weight|*]=Frame-font [angle|*], [weight|*],
[variation|*]
Windows-font is a font family available in Windows. The angle for this font can be either Regular or Italic,
and the weight can be one of the weights defined in the font profile under [Fonts]. You can also use an
as
terisk (*) to specify no particular angle or weight.
Frame-font is a font family available on the other platforms. The angle, weight, and variation for this
fam
ily can be any of the ones defined in the font profile. If you use an asterisk (*), the FrameMaker font
will use the angle, weight, or variation from the Windows font.
67
UNKNOWNTOKNOWNFONTMAP
CHAPTER 2 MAKER.INI
For example, this setting assigns the Windows font family Helvetica Narrow to the FrameMaker font
name Helvetica with the Narrow variation:
HelveticaNarrow, * , *=Helvetica, * , * , Narrow
The two asterisks specify that angles and weights are not affected in this alias.
If you do not have an appropriate alias defined for a Windows font, the default alias is used:
Windows-font *, *=Frame-font *, *, *
You can add more aliases to [WindowsToFrameFontAliases] and change existing ones. Follow the syntax
for any changes you make.
UnknownToKnownFontMap
When you open a document that requires fonts not available on your system, an alert box appears telling
you the document uses unavailable fonts. If you click OK, FrameMaker opens the document and substi-
tutes the unavailable fonts with the fonts specified under [UnknownToKnownFontMap] in the initializa-
tion file. Initially, this section has a few lines of comments and some mappings for common Macintosh®
fo
nts. You can change these mappings and add others.
The mappings under [UnknownToKnownFontMap] must use this syntax:
unavailable_Frame_font [angle|*], [weight|*],
[variation|*]=available_Frame_font [angle|*], [weight|*],[variation|*]
The angles, weights, and variations for these mappings can be any of the ones defined in the font profile
under [Fonts]. You can also use an asterisk (*) to specify no particular angle, weight, or variation.
For example,
Lumina, *, *=Helvetica, *, *, *
Helvetica, *, Light, *=Helvetica, *, Regular, *
Helvetica, *, *, UltraCompressed=Helvetica, *, *, Narrow
If you open a document with unavailable fonts and don’t have substitutes mapped for those fonts,
FrameMaker replaces them with the default fonts defined under [Fonts] instead. Note that the settings
under [UnknownToKnownFontMap] map one FrameMaker font to another. This is different from
[WindowsToFrameFontAliases], which assigns a FrameMaker font name to an equivalent Windows font.
Filters
This section in the ini file contains settings for identifying foreign file formats, export filters, and import
filters. FrameMaker provides these settings when you install filters. If you want to change any of the
settings, install the filters again. Do not edit the settings manually in an initialization file.
68
AEMRECENTFAVSETTINGS
CHAPTER 2 MAKER.INI
AEMRecentFavSettings
This section in the ini file contains settings for working with the Repository Manager. When you establish
a connection with Adobe Experience Manager server, you can configure the number of entries to show
in the Recent (R)/Favourites (F) list.
MaxRecentlyVisitedFilesValue
This flag defines the maximum number of recently visited files to show in the recent/favorite list.
Defa
ult value is 5.
MaxFavFoldersValue
This flag defines the maximum number of favorite folders to show in the recent/favorite list.
Default value is 5.
