English

SOLO SOUNDBAR SERIES II

IMPORTANT SAFETY INSTRUCTIONS

ENG

Please read and keep all safety, security, and use instructions.

Bose Corporation hereby declares that this product is in compliance with the essential requirements and

other relevant provisions of Directive 2014/53/EU and all other applicable EU directive requirements.

The complete declaration of conformity can be found at: www.Bose.com/compliancewww.Bose.com/compliance

This product conforms to all applicable Electromagnetic Compatibility Regulations 2016 and all other

applicable UK regulations. The complete declaration of conformity can be found at:

www.Bose.com/compliancewww.Bose.com/compliance

Bose Corporation hereby declares that this product is in compliance with the essential requirements per

Radio Equipment Regulations 2017 and all other applicable UK regulations. The complete declaration of

conformity can be found at: www.Bose.com/compliancewww.Bose.com/compliance

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus

(including ampliﬁers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with

one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade

or the third prong are provided for your safety. If the provided plug does not ﬁt into your outlet, consult an

electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the

point where they exit from the apparatus.

11. Only use attachments/accessories speciﬁed by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table speciﬁed by the manufacturer, or sold with the

apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid

injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualiﬁed personnel. Servicing is required when the apparatus has been damaged in any

way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the

apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

WARNINGS/CAUTIONS

This symbol on the product means there are important operating and maintenance instructions in this guide.

IMPORTANT SAFETY INSTRUCTIONS

ENG

Do not ingest battery, chemical burn hazard. The remote control supplied with this product contains a coin/

button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2

hours and can lead to death. Keep new and used batteries away from children. If the battery compartment

does not close securely, stop using the remote control and keep it away from children. If you think batteries

might have been swallowed or placed inside any part of the body, seek immediate medical attention. To

avoid risk of explosion, ﬁre or chemical burn, use caution in replacing the battery and replace only with an

agency approved (e.g., UL) CR2032 or DL2032 3-volt lithium battery. Properly and promptly dispose of used

batteries. Do not recharge, disassemble, heat above 212° F (100° C) or incinerate.

This product contains magnetic material. Consult your physician on whether this might aect your

implantable medical device.

• To reduce the risk of ﬁre or electrical shock, do NOT expose this product to rain, liquids or moisture.

• Do NOT expose this apparatus to dripping or splashing, and do not place objects ﬁlled with liquids, such as vases,

on or near the product.

• Keep the product away from ﬁre and heat sources. Do NOT place naked ﬂame sources, such as lighted candles, on

or near the product.

• Do NOT make unauthorized alterations to the product.

• Do NOT use a power inverter with this product.

• Do NOT use in vehicles or boats.

• The speaker wire and interconnect cables included with this system are not approved for in-wall installation. Please

check your local building codes for the correct type of wire and cable required for in-wall installation.

• Use this product only with the power supply provided.

• Where the mains plug or appliance coupler is used as the disconnect device, the disconnect device shall remain

readily operable.

• The battery provided with this product may present a risk of ﬁre, explosion or chemical burn if mishandled,

incorrectly replaced or replaced with an incorrect type.

• The product label is located on the bottom of the product.

• Do NOT expose products containing batteries to excessive heat (e.g. from storage in direct sunlight, ﬁre or the like).

• Only use the mounting hardware supplied with this product.

• Do NOT mount on surfaces that are not sturdy, or that have hazards concealed behind them, such as electrical

wiring or plumbing. If you are not sure about installing the bracket, contact a qualiﬁed professional installer. Ensure

the bracket is installed according to local building codes.

• Only for mounting on the following surfaces:

– Wallboard ≥ q (10 mm)

– Masonry

If mounted on surfaces other than stated above please contact a professional installer.

• Due to ventilation requirements, Bose does not recommend placing the product in a conﬁned space such as in a

wall cavity or in an enclosed cabinet.

• Do not place or install the bracket or product near any heat sources, such as ﬁreplaces, radiators, heat registers or

other apparatus (including ampliﬁers) that produce heat.

Solvent, lubricant, and cleaning agent warning

WARNING: Do not use hydrocarbon based solvents, lubricants or cleaning agents of any type on or around Bose

speakers, and associated mounting hardware, during installation. The use of such hydrocarbon based lubricants,

solvents or cleaning agents on or around the mounting anchors and screws can lead to degradation of the plastic

material, possibly resulting in cracking and premature failure of the product.

REGULATORY INFORMATION

ENG

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment o and on, the user

is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Changes or modiﬁcations not expressly approved by Bose Corporation could void the user’s authority to operate

this equipment.

This device complies with part 15 of the FCC Rules and with ISED Canada license-exempt RSS standard(s). Operation

is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause undesired operation.

This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

CAN ICES-3(B)/NMB-3(B)

Product Power State Table

The product, in accordance with the Ecodesign Requirements for Energy Related Products Directive 2009/125/EC and

the Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020, is in

compliance with the following norm(s) or document(s): Regulation (EC) No. 1275/2008, as amended by Regulation

(EU) No. 801/2013.

Required Power State Information

Power Modes

Standby Networked Standby

Power consumption in speciﬁed power mode, at

230V/50Hz input

≤

0.5 W N/A*

Time after which equipment is automatically

switched into mode

< 2.5 hours N/A*

Power consumption in networked standby if all wired

network ports are connected and all wireless network

ports are activated, at 230V/50Hz input

N/A N/A*

Network port deactivation/activation procedures.

Deactivating all networks will enable standby mode.

Bluetooth®: Deactivate by clearing the pairing list by pressing and

holding the Bluetooth button for 10 seconds. Activate by pairing with a

Bluetooth source.

*product does not utilize a networked standby mode for a Bluetooth

connection and does not have the ability to be conﬁgured to a network

via Wi-Fi® or Ethernet.

REGULATORY INFORMATION

ENG

External Power Supply Technical Information

The external power supply provided with the product, in accordance with the Ecodesign Requirements for Energy

Related Products Directive 2009/125/EC and the Ecodesign for Energy-Related Products and Energy Information

(Amendment) (EU Exit) Regulations 2020, is in compliance with the following norms(s) or documents(s):

Commission Regulation (EU) 2019/1782.

Manufacturer Bose Products B.V.

Commercial registration number 36037901

Address

Gorslaan 60

1441 RG Purmerend

The Netherlands

Model identiﬁer DT20V-1.8C-DC

Input voltage 100V-240V

Input AC frequency 50Hz/60Hz

Output voltage 20V DC

Output current

1.8A

Output power

36W

Average active eciency 89.6%

Eciency at low load (10%) 90.1%

No-load power consumption 0.08W

For Europe:

Frequency band of operation 2400 to 2483.5 MHz.

Maximum transmit power less than 20 dBm EIRP.

Maximum transmit power is below regulatory limits such that SAR testing is not necessary and exempt per

applicable regulations.

This symbol means the product must not be discarded as household waste, and should be delivered to an

appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources,

human health and the environment. For more information on disposal and recycling of this product, contact

your local municipality, disposal service, or the shop where you bought this product.

REGULATORY INFORMATION

ENG

Management Regulation for Low-power Radio-frequency Devices

Article XII

According to “Management Regulation for Low-power Radio-frequency Devices” without permission granted by

the NCC, any company, enterprise, or user is not allowed to change frequency, enhance transmitting power or alter

original characteristic as well as performance to an approved low power radio-frequency devices.

Article XIV

The low power radio-frequency devices shall not inﬂuence aircraft security and interfere legal communications; If

found, the user shall cease operating immediately until no interference is achieved. The said legal communications

means radio communications operated in compliance with the Telecommunications Act.

The low power radio-frequency devices must be susceptible with the interference from legal communications or ISM

radio wave radiated devices.

Date of Manufacture: The eighth digit in the serial number indicates the year of manufacture; “0” is 2010 or 2020.

China Importer: Bose Electronics (Shanghai) Company Limited, Part C, Plant 9, No. 353 North Riying Road, China

(Shanghai) Pilot Free Trade Zone

EU Importer: Bose Products B.V., Gorslaan 60, 1441 RG Purmerend, The Netherlands

Taiwan Importer: Bose Taiwan Branch, 9F-A1, No. 10, Section 3, Minsheng East Road, Taipei City 104, Taiwan

Phone Number: +886-2-2514 7676

Mexico Importer: Bose de México, S. de R.L. de C.V., Paseo de las Palmas 405-204, Lomas de Chapultepec, 11000

México, D.F. Phone Number: +5255 (5202) 3545

UK Importer: Bose Limited, Bose House, Quayside Chatham Maritime, Chatham, Kent, ME4 4QZ, United Kingdom

Input Rating: 20V p 30W MAX

The CMIIT ID is located on the bottom of the soundbar.

California: Contains lithium ion battery with Perchlorate Material - special handling may apply.

See www.dtsc.ca.gov/hazardouswaste/perchloratewww.dtsc.ca.gov/hazardouswaste/perchlorate

REGULATORY INFORMATION

ENG

China Restriction of Hazardous Substances Table

Names and Contents of Toxic or Hazardous Substances or Elements

Toxic or Hazardous Substances and Elements

Part Name

Lead

(Pb)

Mercury

(Hg)

Cadmium

(Cd)

Hexavalent

(CR(VI))

Polybrominated

Biphenyl

(PBB)

Polybrominated

diphenylether

(PBDE)

PCBs X O O O O O

Metal Parts X O O O O O

Plastic Parts O O O O O O

Speakers X O O O O O

Cables X O O O O O

This table is prepared in accordance with the provisions of SJ/T 11364.

O: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part

is below the limit requirement of GB/T 26572.

X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials

used for this part is above the limit requirement of GB/T 26572.

Taiwan Restriction of Hazardous Substances Table

Equipment name: Powered Speaker, Type designation: 418775

Restricted substances and its chemical symbols

Unit

Lead

(Pb)

Mercury (Hg) Cadmium (Cd)

Hexavalent

chromium (Cr+6)

Polybrominated

biphenyls (PBB)

Polybrominated

diphenyl ethers

(PBDE)

PCBs

- ○ ○ ○ ○ ○

Metal Parts

- ○ ○ ○ ○ ○

Plastic Parts

○ ○ ○ ○ ○ ○

Speakers

- ○ ○ ○ ○ ○

Cables

- ○ ○ ○ ○ ○

Note 1: “○” indicates that the percentage content of the restricted substance does not exceed the percentage of reference value

of presence.

Note 2: The “−” indicates that the restricted substance corresponds to the exemption.

Please complete and retain for your records

The serial and model numbers are located on the bottom of the soundbar and on the packaging for the remote.

Serial number: _________________________________________________________________

Model number: 418775

Please keep your receipt with your owner’s guide. Now is a good time to register your Bose product.

You can easily do this by going to global.Bose.com/registerglobal.Bose.com/register

ENG

LEGAL INFORMATION

Security Information

This product contains software. Bose may provide updates from time to time, including those to address

security issues that may impact product functionality. You are responsible for applying updates for the

products you own, and may access them by contacting Bose customer service.

Visit: worldwide.Bose.com/contactworldwide.Bose.com/contact

The Bluetooth

word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such

marks by Bose Corporation is under license.

Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the

double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.

The terms HDMI, HDMI High-Deﬁnition Multimedia Interface, and the HDMI logo are trademarks or

registered trademarks of HDMI Licensing Administrator, Inc.

Bose, Bose Home Speaker, Bose Music, Bose Portable Home Speaker, Bose Solo Soundbar Series, Bose Soundbar, and

SimpleSync are trademarks of Bose Corporation.

Bose Corporation Headquarters: 1-877-230-5639

prior written permission.

CONTENTS

ENG

WHAT’S IN THE BOX

Contents ............................................................................................................................. 12

SOUNDBAR PLACEMENT

Recommendations.......................................................................................................... 13

Wall mount the soundbar ............................................................................................ 14

Adjust audio for wall mounting ......................................................................... 14

SET UP THE SOUNDBAR

Cable options ................................................................................................................... 15

Connect the soundbar to your TV ........................................................................... 16

Option 1: Optical (preferred) .............................................................................. 16

Option 2: Coaxial (not provided) ..................................................................... 17

Connect the soundbar to power ............................................................................... 18

Mounting ring ........................................................................................................... 18

Turn o your TV speakers ........................................................................................... 19

Check for sound ............................................................................................................. 19

SOUNDBAR CONTROLS

Remote functions ............................................................................................................ 20

Power ........................................................................................................................... 21

Auto-wake ................................................................................................................. 22

Volume ........................................................................................................................ 23

Sources ....................................................................................................................... 24

Dialogue mode ................................................................................................................. 25

Adjust the bass ................................................................................................................ 26

Reset the bass .................................................................................................................. 27

Program a third-party remote ................................................................................... 27

CONTENTS

ENG

BLUETOOTH® CONNECTIONS

Connect a mobile device ............................................................................................. 28

Disconnect a mobile device ........................................................................................ 29

Reconnect a mobile device ......................................................................................... 29

Connect an additional mobile device ..................................................................... 30

Switch between connected devices ........................................................................ 30

Clear the soundbar device list ................................................................................... 30

SOUNDBAR STATUS

Power, volume, and error status ................................................................................ 31

Bluetooth status .............................................................................................................. 31

ALTERNATE SETUP

No sound from a source(s) connected to your TV ............................................ 32

No optical or coaxial ports on your TV .................................................................. 32

Connect a source to the soundbar .................................................................. 33

Connect a source’s analog port to the soundbar ...................................... 34

Connect two sources to the soundbar ........................................................... 35

Use two sources connected to the soundbar .............................................. 37

Connect a TV headphone port to the soundbar ........................................ 38

CONNECT BOSE PRODUCTS

Connect a Bose Home Speaker or Soundbar ...................................................... 39

Compatible products ............................................................................................ 39

Connect using the Bose Music app ................................................................. 39

Reconnect to a Bose Home Speaker or Soundbar ............................................ 40

CONTENTS

ENG

CARE AND MAINTENANCE

Replace the remote battery ........................................................................................ 41

Clean the soundbar ........................................................................................................ 42

Replacement parts and accessories ........................................................................ 42

Limited warranty ............................................................................................................. 42

TROUBLESHOOTING

Try these solutions ﬁrst ................................................................................................ 43

Other solutions ................................................................................................................ 43

ENG

WHAT’S IN THE BOX

CONTENTS

Conﬁrm that the following parts are included:

Bose Solo Soundbar Series II Power supply Power cord*

Optical cable Remote

(battery provided)

* May ship with multiple power cords. Use the power cord for your region.

NOTE: If any part of the product is damaged, don’t use it. Contact your

authorized Bose dealer or Bose customer service.

Visit: worldwide.Bose.com/Support/SBSoloiiworldwide.Bose.com/Support/SBSoloii

ENG

SOUNDBAR PLACEMENT

RECOMMENDATIONS

• Place the soundbar outside of and away from metal cabinets, other audio/video

components, and direct heat sources.

• Place the soundbar directly below (preferred) or above your TV with the grille

facing into the room.

• Place the soundbar on its rubber feet on a stable and level surface. For proper

support, both feet must be resting on the surface. Vibration can cause the soundbar

to move, particularly on smooth surfaces like marble, glass, or highly polished wood.

• If placing the soundbar on a shelf or TV stand, position the front of the soundbar as

close as possible to the front edge of the shelf or stand for best sound quality.

• Keep the back side of the soundbar at least 0.4 in (1 cm) from any other surface.

Blocking the ports on this side aects sound quality.

• Make sure there is an AC (mains) outlet nearby.

• To avoid wireless interference, keep other wireless equipment 1 – 3 ft (0.3 – 0.9 m)

away from the soundbar.

• For best sound quality, don’t place the soundbar in an enclosed cabinet or

diagonally in a corner.

• Don’t place any objects on top of the soundbar.

CAUTION: Do NOT place the soundbar on its front, back, or top when in use.

SOUNDBAR PLACEMENT

ENG

WALL MOUNT THE SOUNDBAR

You can mount the soundbar on a wall. Follow the installation instructions included

with the soundbar.

CAUTION: Do NOT use any other hardware to mount the soundbar.

Adjust audio for wall mounting

On the remote, press and hold the Dialogue mode button 5 for 5 seconds until the

status light on the soundbar blinks amber (see page 31).

NOTE: If you remove the soundbar from the wall, repeat to return the soundbar to

default audio settings.

ENG

SET UP THE SOUNDBAR

CABLE OPTIONS

Connect your TV to the soundbar using one of the two cable options.

• Option 1: Optical (preferred)

• Option 2: Coaxial (not provided)

NOTE: If your TV does not have an optical or coaxial port, see “Alternate Setup” on

page 32.

1. On the back of your TV, locate the Audio OUT (optical) port panel.

NOTE: You must connect the audio cable through your Audio OUT panel.

Optical Coaxial Optical Coaxial

Your TV's port panel may not appear as shown.

Look for the shape or color (coaxial) of the port.

Option 1:

Optical cable (digital audio)

Preferred method

for connection.

Option 2:

Coaxial cable (digital audio)

Use if no optical output

is available.

2. Choose an audio cable.

SET UP THE SOUNDBAR

ENG

CONNECT THE SOUNDBAR TO YOUR TV

Option 1: Optical (preferred)

1. Remove the protective cap from both ends of the optical cable.

CAUTION: Make sure you have removed the protective cap from both ends of

the optical cable. Inserting the plug with the cap on or in the wrong

orientation can damage the plug and/or the port.

2. Align the plug on one end of the cable with your TV’s Optical OUT port and insert

the plug carefully.

3. Hold the plug at the other end of the optical cable with the Bose logo facing down.

4. Align the plug with the soundbar’s OPTICAL port and insert the plug carefully.

Service

TV Input

AUX Optical Coaxial Power

NOTE: The port has a hinged door that swings inward when inserting the plug.

5. Firmly push the plug into the port until you hear or feel a click.

SET UP THE SOUNDBAR

ENG

Option 2: Coaxial (not provided)

1. Insert one end of the coaxial cable into your TV’s coaxial port.

2. Insert the other end of the coaxial cable into the Coaxial port on

the soundbar.

Service

AUX Optical

TV Input

Coaxial Power

SET UP THE SOUNDBAR

ENG

CONNECT THE SOUNDBAR TO POWER

1. Connect the power cord to the power supply.

Service

AUX Optical

TV Input

Coaxial Power

Mounting ring

2. Connect the power supply into the Power port on the back of the soundbar.

3. Plug the other end of the power cord into a live AC (mains) outlet.

The soundbar powers on, and you hear a tone.

Mounting ring

To hide the power supply behind your mounted TV, attach the mounting ring to your

TV’s wall mount using zip ties or bread ties (not provided).

SET UP THE SOUNDBAR

ENG

TURN OFF YOUR TV SPEAKERS

To avoid hearing distorted sound, turn o your TV speakers.

For more information, refer to your TV owner’s guide.

TIP: The audio settings are usually found in the TV menu.

CHECK FOR SOUND

1. Power on your TV.

2. If you are using a cable/satellite box or other secondary source:

a. Power on this source.

b. Select the appropriate TV input.

3. Power on the soundbar (see page 21).

You hear sound coming from the soundbar.

4. On the remote, press the Mute button A.

You don’t hear sound coming from the TV speakers or soundbar.

NOTE: If you don’t hear sound coming from the soundbar or hear sound coming from

your TV speakers, see “Troubleshooting” on page 43.

ENG

SOUNDBAR CONTROLS

REMOTE FUNCTIONS

Use the remote to control the soundbar and Bluetooth connections.

Volume up (see page 23)

Volume down (see page 23)

Bluetooth button (see page 24)

Power button (see page 21)

Dialogue mode (see page 25)

TV button (see page 24)

Adjust the bass (see page 26)

Mute/Unmute (see page 23)

SOUNDBAR CONTROLS

ENG

Power

On the remote, press the Power button I to power the soundbar on/o.

When powered on, the soundbar defaults to the last active source.

NOTES:

• When you plug the soundbar into an AC (mains) outlet, the soundbar automatically

powers on.

• The ﬁrst time the soundbar is powered on, the soundbar defaults to the

TV O source.

• The soundbar powers o after 60 minutes of inactivity.

SOUNDBAR CONTROLS

ENG

Auto-wake

You can set the soundbar to power on whenever a sound signal is received.

On the remote, to toggle between auto-wake and default power settings, press and

hold the Power button I until you hear three tones and the status light on the

soundbar blinks 3 times (see page 31).

The status light glows dim amber when the soundbar is o and auto-wake

is enabled.

SOUNDBAR CONTROLS

ENG

Volume

FUNCTION WHAT TO DO

Volume up

Press H.

NOTE: To quickly increase the volume, press and hold H.

Volume down

Press z.

NOTE: To quickly decrease the volume, press and hold z.

Mute/Unmute

Press A.

When audio is muted, the status light blinks green until audio resumes.

NOTE: When Dialogue mode is enabled and audio is muted, the status

light blinks amber.

Tip: You can also press H to resume audio.

SOUNDBAR CONTROLS

ENG

Sources

You can control your TV and Bluetooth connections using your remote.

To select a source, press the button (TV button O or Bluetooth button l) on

the remote.

SOUNDBAR CONTROLS

ENG

DIALOGUE MODE

Dialogue mode improves the clarity of dialogue and vocals in movies, TV programs,

and podcasts by adjusting the audio balance of the system.

On the remote, press the Dialogue mode button 5 to switch between Dialogue mode

and your default audio settings.

When Dialogue mode is enabled, the status light glows amber (see page 31).

NOTE: When you enable Dialogue mode, it stays enabled for your current source

even if you switch to another source or turn o the soundbar. To disable

Dialogue mode for a source, press 5 again.

ENG

SOUNDBAR CONTROLS

ADJUST THE BASS

1. On the remote, press h.

On the soundbar, the status and Bluetooth lights blink white 3 times.

2. Adjust the bass by doing one of the following:

• Press Volume up H to increase the bass.

• Press Volume down z to decrease the bass.

The status and Bluetooth lights on the soundbar glow to show the current

bass setting.

BASS SETTING STATUS LIGHT BLUETOOTH LIGHT

2 (maximum)

0 (default)

-1

-2 (minimum)

3. Press h.

The soundbar saves the current bass setting.

NOTE: For best sound quality for dialogue-only programs, such as news and talk

shows, see ”Dialogue mode” on page 25.

SOUNDBAR CONTROLS

ENG

RESET THE BASS

On the remote, press and hold h until the status and Bluetooth lights on the

soundbar blink 3 times.

The bass setting reset to original factory settings.

PROGRAM A THIRD-PARTY REMOTE

You can program a third-party remote, such as your cable/satellite box remote, to

control the soundbar. Refer to your third-party remote owner’s guide or website

for instructions.

Once programmed, the third-party remote performs basic functions such as power

on/o and volume.

ENG

BLUETOOTH CONNECTIONS

Bluetooth wireless technology lets you stream music from mobile devices such as

smartphones, tablets, and laptop computers. Before you can stream music from a

device, you must connect your device to the soundbar.

CONNECT A MOBILE DEVICE

1. On the remote, press and hold the Bluetooth button l until the Bluetooth light on

the soundbar blinks blue.

2. On your mobile device, turn on the Bluetooth feature.

TIP: The Bluetooth menu is usually found in the Settings menu.

ENG

BLUETOOTH CONNECTIONS

3. Select your soundbar from the device list.

Bose Solo

Once connected, you hear a tone. The Bluetooth light glows solid white. Your

soundbar appears in the mobile device list.

DISCONNECT A MOBILE DEVICE

Use your mobile device’s Bluetooth menu to disconnect from the soundbar.

TIP: You can also disable the Bluetooth feature on your mobile device to disconnect.

Disabling the Bluetooth feature disconnects all other devices.

RECONNECT A MOBILE DEVICE

On the remote, press the Bluetooth button l.

The soundbar tries to reconnect with the two most recently-connected devices. When

connecting, the Bluetooth light on the soundbar blinks white.

NOTES:

• Make sure the Bluetooth feature is enabled on your mobile device.

• The device must be within 30 ft (9 m) of the soundbar and powered on.

ENG

CONNECT AN ADDITIONAL MOBILE DEVICE

You can store up to eight devices in the soundbar device list, and the soundbar can be

actively connected to two devices at a time.

NOTE: You can play audio from only one device at a time.

1. On the remote, press and hold the Bluetooth button l until the Bluetooth light on

the soundbar blinks blue.

2. On your mobile device, select your soundbar from the device list.

NOTE: Make sure the Bluetooth feature is enabled on your mobile device.

SWITCH BETWEEN CONNECTED DEVICES

1. Pause audio on your ﬁrst device.

2. Play audio on your second device.

CLEAR THE SOUNDBAR DEVICE LIST

1. On the remote, press and hold l for 10 seconds until the Bluetooth light on the

soundbar blinks blue.

2. Delete your soundbar from the Bluetooth list on your device.

All devices are cleared, and the soundbar is ready to connect (see page 28).

BLUETOOTH CONNECTIONS

ENG

SOUNDBAR STATUS

The LED lights located on the front of the soundbar show the soundbar status.

Bluetooth light

Status light

POWER, VOLUME, AND ERROR STATUS

Shows the power, media volume, and error status.

STATUS LIGHT ACTIVITY SYSTEM STATE

O Power o (standby)

Glows solid green Power on

Blinks green Audio muted

Glows dim amber Standby, auto-wake enabled

Glows solid amber Dialogue mode

Blinks amber Dialogue mode, audio muted

Blinks red Error - contact Bose customer service

BLUETOOTH STATUS

Shows the Bluetooth connection status of mobile devices.

BLUETOOTH LIGHT ACTIVITY SYSTEM STATE

Blinks blue Ready to connect

Blinks white Connecting

Glows solid white Connected

ENG

ALTERNATE SETUP

You may need to use an alternate setup method for the following reasons:

• No sound from a source(s) connected to your TV.

• No optical or coaxial port on your TV.

NO SOUND FROM A SOURCE(S) CONNECTED TO

YOUR TV

Some TVs don’t deliver sound from connected sources to the soundbar. Use an

alternate setup method to connect your source(s) to the soundbar.

PROBLEM WHAT TO DO

No sound from a source connected

to your TV

Connect your source to the soundbar using one of the

two cable options (see page 33).

No sound from two sources

connected to your TV

Connect your sources to the soundbar using Option 1

or Option 2 (see page 35).

NO OPTICAL OR COAXIAL PORTS ON YOUR TV

Some TVs don’t have optical or coaxial ports. Use an alternate setup method to

connect your TV to the soundbar.

PROBLEM WHAT TO DO

TV only has an analog port

Connect your TV using a 3.5 mm to RCA stereo cable

(not provided). See page 34.

TV only has a headphone port

Connect your TV using a 3.5 mm stereo cable (not

provided). See page 38.

TV doesn’t have audio outputs

Use the audio outputs on another source, such as a

cable/satellite box, to connect to the soundbar (see

page 33).

ENG

ALTERNATE SETUP

Connect a source to the soundbar

If you don’t get sound from a source that’s connected to your TV, such as a

DVD/Blu-ray Disc™ player, cable/satellite box, game system, or DVR, connect the

source directly to the soundbar using an audio cable.

CAUTION: If using an optical cable, remove the protective caps from both ends.

Inserting the plug in the wrong orientation can damage the plug and/or

the port.

1. On the back of your source, locate the Audio OUT (digital) panel.

Service

AUX Optical

TV Input

Coaxial Power

Optical Coaxial

Audio OUT

Source panel

Soundbar port panel

2. Choose an audio cable.

3. If you haven’t already, disconnect your TV from the soundbar.

4. Connect the audio cable from your source’s Audio OUT (digital)

panel to the soundbar.

NOTE: Don’t disconnect your source’s video cable, such as an HDMI cable, from

your TV.

ENG

ALTERNATE SETUP

Connect a source’s analog port to the soundbar

If your source doesn’t have an optical or coaxial port and only has analog

ports (red and white), use a 3.5 mm to RCA stereo cable (not provided) to connect to

the soundbar.

1. If you haven’t already, disconnect your TV from the soundbar.

2. Insert the RCA analog cable into the Audio OUT RCA (red and white) ports on

your source.

3. Insert the stereo plug into the soundbar’s d port.

Service

TV Input

AUX Optical Coaxial Power

Audio OUT

Source port

panel

Soundbar port panel

3.5 mm to RCA

stereo cable

(not provided)

ENG

ALTERNATE SETUP

Connect two sources to the soundbar

If you don’t get sound from any source that’s connected to your TV, such as a

DVD/Blu-ray Disc™ player, cable/satellite box, game system, or DVR, connect the

source directly to the soundbar. Use only one audio cable for each source.

1. On the back of each source, locate the Audio OUT (digital) panel.

2. Choose a separate audio cable for each source using either Option 1 or Option 2

(see page 36).

NOTE: You MUST use either Option 1 or Option 2. Do not use the coaxial cable (not

provided) and optical cable at the same time.

3. If you haven’t already, disconnect your TV from the soundbar.

4. Separately connect the audio cable from each source’s Audio OUT (digital) panel

to the soundbar.

NOTE: Do not disconnect your source’s video cable, such as an HDMI cable, from

your TV.

ENG

ALTERNATE SETUP

Option 1

This ﬁgure shows two source connections using an optical cable and 3.5 mm to RCA

stereo cable (not provided).

CAUTION: If using an optical cable, remove the protective caps from both ends.

Inserting the plug in the wrong orientation can damage the plug and/or

the port.

3.5 mm to RCA

stereo cable

(not provided)

Service

TV Input

CoaxialOptical

AUX Optical Coaxial Power

Audio OUT

Source 2

Audio OUT

Source 1

Soundbar port panel

ENG

ALTERNATE SETUP

Option 2

This ﬁgure shows two source connections using a coaxial cable (not provided) and

3.5 mm to RCA stereo cable (not provided).

Service

TV Input

CoaxialOptical

AUX Optical Coaxial Power

Audio OUT

Source 2

Audio OUT

Source 1

Soundbar port panel

3.5 mm to RCA

stereo cable

(not provided)

Use two sources connected to the soundbar

Power o sources when not in use. In order for one source to deliver audio to the

soundbar, your other source must be o.

ALTERNATE SETUP

ENG

Connect a TV headphone port to the soundbar

If your TV only has a headphone port, use a 3.5 mm stereo cable (not provided) to

connect to the soundbar.

1. Insert one end of a 3.5 mm stereo cable into the TV headphones port.

2. Insert the other end of the cable into the d port on the soundbar.

Service

3.5 mm

TV Input

AUX Optical Coaxial Power

Soundbar port panel

Audio OUT

TV headphone panel

(or other variable

audio output)

3.5 mm stereo cable

(not provided)

3. Make sure your TV speakers are on.

Refer to your TV owner’s guide for more information.

4. To ensure optimal volume control from the soundbar:

a. Set your TV volume to 75% of maximum.

b. Set the soundbar volume using the remote.

ENG

CONNECT BOSE PRODUCTS

CONNECT A BOSE HOME SPEAKER OR SOUNDBAR

With Bose SimpleSync™ technology, you can connect your Bose Solo Soundbar

Series II to a Bose Home Speaker or Bose Soundbar to listen to the same song in two

dierent rooms at the same time.

NOTE: SimpleSync™ technology has a Bluetooth range of 30 ft (9 m). Walls and

construction materials can aect reception.

Compatible products

You can connect your Bose Solo Soundbar Series II to any member of the

Bose Home Speaker family.

Popular compatible products include:

• Bose Soundbar 700

• Bose Soundbar 500

• Bose Home Speaker 500

• Bose Home Speaker 300

• Bose Portable Home Speaker

New products are added periodically. For a complete list and more information, visit:

worldwide.Bose.com/Support/Groupsworldwide.Bose.com/Support/Groups

Connect using the Bose Music app

1. On your Bose Solo Soundbar Series II remote, press and hold the Bluetooth button

l until the Bluetooth light on your Bose Solo Soundbar Series II blinks blue.

2. For information about connecting a Bose Home Speaker or Bose Soundbar using

the Bose Music app, visit: worldwide.Bose.com/Support/Groupsworldwide.Bose.com/Support/Groups

NOTES:

• Make sure that your Bose Solo Soundbar Series II is within 30 ft (9 m) of your

Bose Home Speaker or Bose Soundbar.

• You can connect your Bose Solo Soundbar Series II to only one product at a time.

CONNECT BOSE PRODUCTS

ENG

RECONNECT TO A BOSE HOME SPEAKER OR SOUNDBAR

Power on your Bose Solo Soundbar Series II (see page 21).

Your Bose Solo Soundbar Series II tries to connect to the two most recently- connected

Bluetooth devices, including your Bose Home Speaker or Bose Soundbar.

NOTES:

• Your Bose Home Speaker or Bose Soundbar must be within range (30 ft or 9 m)

and powered on.

• If your Bose Solo Soundbar Series II doesn’t connect, connect using the Bose Music

app. You can access this option from the Settings menu.

ENG

CARE AND MAINTENANCE

REPLACE THE REMOTE BATTERY

The soundbar remote uses coin cell battery CR2032.

1. Turn the battery compartment cover left (counter-clockwise) and remove

the cover.

2. Insert the new battery ﬂat side up, with the + symbol facing up.

3. Reset the cover and turn it right (clockwise) to lock in place.

CARE AND MAINTENANCE

ENG

CLEAN THE SOUNDBAR

Clean the exterior of the soundbar with a soft dry cloth.

CAUTION:

• Do NOT allow liquids to spill onto the soundbar or into any openings.

• Do NOT blow air into the soundbar.

• Do NOT use a vacuum to clean the soundbar.

• Do NOT use any sprays near the soundbar.

• Do NOT use any solvents, chemicals, or cleaning solutions containing alcohol,

ammonia, or abrasives.

• Do NOT allow objects to drop into any openings.

REPLACEMENT PARTS AND ACCESSORIES

Replacement parts and accessories can be ordered through Bose customer service.

Visit: worldwide.Bose.com/support/SBSoloiiworldwide.Bose.com/support/SBSoloii

LIMITED WARRANTY

The soundbar is covered by a limited warranty. Visit our website at

global.Bose.com/warrantyglobal.Bose.com/warranty for details of the limited warranty.

To register your product, visit global.Bose.com/registerglobal.Bose.com/register for instructions. Failure to

ENG

TROUBLESHOOTING

TRY THESE SOLUTIONS FIRST

If you experience problems with the soundbar:

• Make sure the soundbar is connected to a live AC (mains) outlet.

• Secure all cables and make sure all connections are correct.

• Check the status lights (see page 31).

• Move the soundbar 1 – 3 ft (0.3 – 0.9 m) away from possible interference (wireless

routers, cordless phones, televisions, microwaves, etc.).

• Move the soundbar within the recommended range of your mobile device for

proper operation.

• Place the soundbar according to the placement guidelines (see page 13).

• Unplug the power cord for at least 1 minute and reconnect.