OWNER'S MANUAL

PREMIUM ADJUSTABLE BASE

[email protected]

888-975-8243

SERIAL NO.

OWNER’S MANUAL

PREMIUM ADJUSTABLE BASE

CONTENTS

Safety & Warranty Warnings

Overview & Parts List

Assembly

Remote Control & Pairing

Synchronizing Two Bases

Emergency Power Down

Connecting with Bluetooth

Troubleshooting

Warranty

PREMIUM ADJUSTABLE BASE

OWNER'S MANUAL

Safety & Warranty Warnings

PLEASE READ ALL INFORMATION CAREFULLY BEFORE

USING THIS PRODUCT. SAVE THESE INSTRUCTIONS.

IMPORTANT:

WARRANTY WARNINGS

Do not open or tamper with control box,

motors, or remote (with the exception of

battery compartments). The warranty will

be void if the internal workings of these

components are tampered with.

SAFETY WARNINGS

• Do not use bed outdoors.

• Using bed with oxygen administering

equipment other than the nasal masked

type creates a possible re hazard.

• When using nasal or masked type

administering equipment, route and

secure oxygen or air tubing properly to

ensure that tubing does not become

entangled or damaged during normal

operation of the bed.

• Keep moving parts free of obstruction

during bed operation (including sheets,

clothing, tubing, wiring, and products

using electric power cords).

WEIGHT LIMITS

• This product is not rated to support

weights in excess of:

Full and Queen: 750lbs. (340kgs)

Twin XL: 500 lbs (226 kgs)

• This limit is inclusive of the mattress

and bedding. The bed will structurally

support this weight, provided it is evenly

distributed across the foundation.

The power foundation is not designed

to support or lift this amount in the

head or foot sections alone. Exceeding

this weight restriction could damage the

bed and/or cause injury and will void

the warranty.

HOSPITAL USE DISCLAIMER

This power foundation is designed for

residential use only. It is not approved for

hospital use and does not comply with

hospital standards.

PRODUCT RATING

The motors are not designed to operate

continuously for more than (2) minutes in

an (18) minute time period. Attempting

to exceed this rating will shorten the life

expectancy of the foundation and will

void the warranty.

SAFE OPERATION

• Use caution when having liquids in or

around the bed to ensure no spilling

occurs. In case of spillage, stand in a

dry, clean area of the oor and unplug

the bed immediately. Clean up spill and

allow the area around bed to dry

thoroughly before using the electric

controls again. Do not eat or drink hot

liquids while operating the bed.

• Do not allow children or individuals with

disabilities to operate the bed without

adult supervision.

• Do not allow any person or pet under

the bed at any time.

• During bed operation, make sure body

is positioned within the connes of the

bed. Do not place extremities over the

sides of the bed when operating bed

functions.

• After power foundation assembly is

completed, operate remote control to

ensure proper functions.

• Distribute body weight evenly over bed

surface. Do not place entire weight on

head or foot sections of the bed, during

reposition and entering or exiting bed.

FCC COMPLIANCE

• Operates on 2.4 GHz frequency

transmitter

• This device complies with Part 15 of the

FCC Rules. Operation is subject to

the following two conditions: (1)

This device may not cause harmful

interference, and (2) this device must

accept any interference received,

including interference that may cause

undesired operation.

• To comply with FCC RF exposure

requirements, no change to the antenna

or the device is permitted. Any change

to the antenna or the device could

result in the device exceeding the RF

exposure requirement and void user's

right to operate the device.

PREMIUM ADJUSTABLE BASE

OWNER'S MANUAL

Overview & Parts List

GET TO KNOW YOUR ADJUSTABLE BASE

Before beginning assembly of your adjustable base, please take

a moment to familiarize yourself with the parts and location of

components, as explained here.

If any parts or components are missing, or are different than

shown in the adjacent image, do not attempt to complete the

assembly process and contact customer support by calling

888-975-8243 or emailing [email protected].

REMOTE

POWER SUPPLY BOX & POWER CORD

THREE ADJUSTABLE HEIGHT

INCREMENTS 2", 3", 6"

6 legs for Twin XL and 7 for Full

and Queen.

SYNC CABLE

Twin XL Only

SECURITY STRAP

Twin XL Only

ANTI-SKID PADS

FOOT MOTOR

MASSAGE MOTORS

HEAD MOTOR

UNDERBED

LED LIGHTS

CONTROL BOX

USB PORTS

MATTRESS RETAINER BAR

LEG ATTACHEMENTS

6 for Twin XL and 7 for

Full and Queen.

PREMIUM ADJUSTABLE BASE

OWNER'S MANUAL

Assembly

Open the carton in a at

position, bottom facing

up, to avoid damage.

Cut all orange and white zip

ties. Do not remove any of

the black zip ties.

Two people are

required to assemble

this adjustable base.

2. 3.1.

NOTES

STEP 2

Insert the securing pins at the center

hinge of the frame to prevent folding

when lifting the base.

STEP 1

Remove folded bed base from the box and

carefully unfold the base. Set it mattress

side down on the oor.

STEP 4

Uncoil the input power cord (connected

to the control box on the underside of the

base) and plug it into the power supply box.

Take caution to avoid pinching ngers

or any underside wires along the hinge.

STEP 5

Uncoil the power cord (that has a wall

outlet connection) and attach it to the

power supply box opposite of the cord

attached in Step 4.

STEP 3

Install legs by threading the bolt of

each leg into the frame and tightening

by hand.

All Twin XL bases feature six legs while

Full and Queen bases feature seven.

PREMIUM ADJUSTABLE BASE

OWNER'S MANUAL

STEP 6

With two to four people, lift the bed by

the metal frame and turn it over so the

mattress side is facing up. Take caution

not to lift the bed with the fabric, or to use

the legs as pivot points. This pressure may

cause damage. Avoid dragging the base

across the oor.

STEP 8

Slide the mattress retaining bar into the

anchors located at the foot of the base.

Assembly, continued

STEP 9

Plug the power cord into the wall outlet

and refer to pages 12-15 to test all the

functionality of the remote.

The Zero-Clearance design of this base allows it to be used without legs, making

it compatible with platform frames, box-springs, and decorative beds.

ADDITIONAL STEPS AND INFORMATION

When using two separate Twin XL

adjustable bases, prevent separation

by wrapping a security strap around

the center head and foot legs.

Remove the adhesive backer from the

anti skid pads and apply the anti skid

pads on the frame. Place evenly on

both sides of the frame.

STEP 7

Ensure three AAA batteries (included) are

installed correctly in the remote.

PREMIUM ADJUSTABLE BASE

OWNER'S MANUAL

PRESET BUTTONS

Zero Gravity (ZG): Elevate the

legs slightly higher than the

chest, allowing blood to ow

back to the heart to help reduce

stress and fatigue.

Anti-Snore: Raise the head to

allow for easier air intake.

TV: Raise the head to the ideal

position for watching TV.

Read: A comfortable and

efcient position for reading and

working in bed.

FLAT: Return your base to a at

position.

Memory: Create two quick-

access memory positions to enjoy

customized comfort.

PROGRAMMABLE BUTTONS

Personalize your experience by

customizing the preset buttons to meet

your preferences. All the preset buttons

except for the FLAT and Anti-Snore

buttons are reprogrammable. To do so:

1. Adjust the head and/or foot of the

base to your desired position.

2. Press and hold the and the

button you want to customize

simultaneously for 2.5 seconds to

save a new memory position.

Press and hold and buttons

simultaneously for ve seconds until the

backlight ashes. All customized settings

are now cleared and retuned to factory

default settings.

CHILD LOCK

Engage child lock by pressing

and holding the lock button

until the light blinks red and

remains red.

Disengage child lock by pressing

and holding the lock button until

the light blinks red ve times and

then turns off.

Remote Control

OVERVIEW

All of the functions of the bed, explained here, can be operated with the remote control.

This remote requires three AAA batteries (included) inserted in the back panel.

MASSAGE BUTTONS

Activate the massage motors by pressing

the MASSAGE BACK or MASSAGE LEGS

buttons. Increase the intensity of the

massage by pressing the MASSAGE BACK

or MASSAGE LEGS buttons up to seven

times. Pressing the MASSAGE BACK or

MASSAGE LEGS buttons an eighth time will

turn the massage motors off.

After selecting your desired intensity,

choose one of four different

massage types by pressing the MASSAGE

TYPE button.

A 10-minute timer is automatically activated

when you turn on the massage motors. A

blue LED light will display above the time

you select on the remote. Increase the

duration of your massage by pressing the

TIMER button once for a 20-minute timer or

twice for a 30-minute timer.

UNDERBED LIGHTING

Press the to discretely illuminate the

oor without disturbing your partner.

PRODUCT RATING

The head and foot motors are not

designed to operate continuously for more

than (2) minutes in an (18) minute time

period. Attempting to exceed this rating

will shorten the life expectancy of the

foundation and will void the warranty.

PREMIUM ADJUSTABLE BASE

OWNER'S MANUAL

FOOT UP

HEAD UP

HEAD AND FOOT UP

FLAT

HEAD DOWN

PAIR (see page 15)

ZERO-GRAVITY

MEMORY POSITION 1

MASSAGE BACK

MASSAGE ON/OFF

HEAD AND FOOT DOWN

FOOT DOWN

MASSAGE LEGS

MASSAGE TYPE

UNDERBED LIGHTS

CHILD LOCK

SAVE

ANTI-SNORE

READ

MEMORY POSITION 2

Remote Control Pairing

OVERVIEW

The original remote that comes in the box is already paired to

the base. No further action is required.

In the event that the remote is not paired with the base (as in the

case of a replacement remote), begin by checking the following:

STEP 2

On the control box (underside of base), press

the PAIR button twice. The LED light on the

control box turns blue.

STEP 3

On the remote control, press and hold the

PAIR button. The light on the remote ashes

and starts the pairing process.

If the pairing is successful, the LED light on

the control box turns to green. If pairing fails,

the LED light on the control box turns off.

Repeat the steps until pairing is successful.

Remote buttons highlighted

STEP 1

Ensure the remote batteries are functioning. Replace if necessary.

Conrm the power cord is connected to a power source.

TIMER

Remote Control, continued

PREMIUM ADJUSTABLE BASE

OWNER'S MANUAL

STEP 2

With the sync cable installed, use remote and test all functions of the

bed base. If remotes are not working, troubleshoot the problem by

following the instructions on page 18.

The two bases are now connected and ready for normal use.

TO PAIR ONE REMOTE TO TWO BASES:

STEP 1

Place two Twin XL or split size adjustable bases

next to each other in desired location. Ensure

both bases are in the at position. Plug the sync

cable into the SYNC input (shown to the left) on

each base's control box.

Emergency Power Down

Connecting with Bluetooth

INSTALLING BATTERIES

Batteries act as a backup power source in

case of a power failure while the head and/

or foot sections are raised.

Locate and remove the cover on the 9V

battery compartment in the power supply

unit. Install two alkaline 9V batteries (not

included) and replace the cover.

If a power failure occurs, pressing the

button will return the base to a at position.

Enjoy the luxury of Bluetooth controls on your

mobile device using the Lucid Base App.

1. Download the Lucid Base App from

iTunes or the Google Play store.

2. Assemble your base and open the Lucid

Base App.

3. Select the ADD NEW button.

4. Select the Lucid Base App.

5. Ensure your phone is connected by

testing the head-up position on the

adjustable base.

6. Review the included list of programmed

shortcut positions.

7. *Enable "Hey Siri" Voice controls.

8. For more information on how to operate

your adjustable base, please visit

lucidmattress.com.

*iPhones only

Batteries are for single use only. After

lowering the adjustable bed once

during a power failure, replace with a

new set of batteries.

Synchronizing Two Bases (Twin XL Only)

PREMIUM ADJUSTABLE BASE

OWNER'S MANUAL

PROBLEM POSSIBLE SOLUTION

No features of the base will activate. Ensure the remote is paired correctly with the

base (see page 15).

Unplug the power cord, wait 30 seconds and

plug back in to reset electric components.

The surge protection or the electrical outlet

may be defective. Test the outlet by plugging

in another working appliance.

Head or foot section will elevate, but will

not return to the at position.

Bed mechanism may be obstructed.

Elevate bed and check for obstruction.

Remove obstruction.

Head section may be too close to the wall.

Head and Foot lift function has minor

interference during operation.

Check batteries in wireless remote control.

Replace with three new AAA batteries

if necessary.

Make sure that you are following the duty

cycle of the motors (do not operate more

than two minutes over an 18 minute period.

Wireless remote may be experiencing

common radio frequency interference from

other radio transmitting devices. Wait several

seconds and try pressing appropriate button

again. See FCC Compliance Statement (page 5).

Base has lost power and will not lower. Refer to remote lock guide (see page 12).

Troubleshooting Warranty Information

The foregoing warranty shall be exclusive and in lieu of any other warranty, express or implied, including warranties of merchant-

ability and tness for a particular purpose and all other warranties otherwise arising by operation of law, course of dealing, custom,

trade, or otherwise. LUCID

shall not be liable for any consequential damages or losses arising from the purchase, installation and/

or use of this product.

WHAT IS COVERED

This warranty covers any defects in materials or

workmanship under the conditions and exceptions

stated below.

HOW LONG COVERAGE LASTS

This warranty runs for up to ten (10) years from

the date of purchase, according to the tiers set

forth below.

WHAT LUCID

WILL DO

Lucid

is the administrator of the warranty for the

adjustable base.

YEARS 1-3:

Warranty covers defects in the workmanship or

materials for a period of three (3) years from the

date of purchase. Lucid

will send replacement

parts for any defective part to the purchaser,

and Lucid

will pay all authorized labor and

transportation costs associated with the repair or

replacement of any parts.

YEARS 4-10:

During the years four (4) through ten (10) from the

date of purchase, Lucid

will offer replacement

parts for any defective mechanical part. Purchaser

shall pay 1/7

of the replacement cost of the

defective part multiplied by the number of years

since three (3) years after the warranty commence-

ment date and Lucid

shall bear the remainder of

the cost of the replacement part. The purchaser

shall bear all labor and shipping costs associated

with repair or replacement of the defective part(s).

An exception to this is the metal frame, which

is covered in full for the duration of the 10-year

warranty.

HOW TO GET SERVICE

E-mail “[email protected]” to submit

your warranty claim. Please keep your receipt so

that we may process your warranty request.

HOW STATE LAW APPLIES

This warranty gives you specic legal rights, and

you may also have other rights which vary from

state to state.

WARRANTY LIMITATIONS

This warranty excludes commercial use.

Purchaser must follow troubleshooting procedures

as set forth by the manufacturer or its agents

before warranty coverage may be granted.

At the sole discretion and direction of the

manufacturer, parts demonstrated to be defective

must be returned. The manufacturer will arrange

all return shipping.

Warranty is void if purchased or transported

outside the USA.

10-YEAR LIMITED WARRANTY

OWNER'S MANUAL20

Notes

DATE OF PURCHASE

PLACE OF PURCHASE

LOT # (found on ID Tag)

PO # (found on shipping box label)

SERIAL # (found on back cover of this manual)

ADDITIONAL NOTES

To assist with warranty claims, please keep your receipt and record the following: